00196378-0102_UM X-Feeder_EN - 第18页
Operational Safety ESD Guidelines Dispatching ESD Modules 18 User Manual X Feeder Modules SIPLACE Family
Operational Safety
Dispatching ESD Modules ESD Guidelines
User Manual X Feeder Modules SIPLACE Family 17
2.3.5 Dispatching ESD Modules
►Always store modules and components in conductive packaging (e.g. metallized plastic bags or metal
sleeves) and dispatch them in conductive packaging.
►If the packaging is not conductive, place the modules in a conductive envelope before packaging.
Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for example. NEVER
use plastic bags or film.
►If the module has integral batteries, ensure that the conductive packaging does not touch or short-
circuit the battery terminals and, if necessary, first cover the terminals with insulating tape or mate-
rial.
Operational Safety
ESD Guidelines Dispatching ESD Modules
18 User Manual X Feeder Modules SIPLACE Family
Overview of X Feeder Modules
Structure of the SIPLACE X-Series Tape Feeder Modules Functions and Operating Controls
User Manual X Feeder Modules SIPLACE Family 19
3 Overview of X Feeder Modules
3.1 Functions and Operating Controls
3.1.1 Structure of the SIPLACE X-Series Tape Feeder Modules
3.1.1.1 Structure of the 2x8 mm Tape Feeder Modules
The following figure shows the structure of the 2x8 mm tape feeder module for the X series.
2x8 mm X tape feeder module
Legend
3.1.1.2 Structure of the 8 - 88 mm Tape Feeder Modules
The two following diagrams show the structure of the tape feeder module for the X-series by means of
the 8 mm X tape feeder module.
(1) Locking roll for fixing the feeder mod-
ule on the component table
(2) EDIF (energy and data interface)
(3) Front centering pin (4) Lever for raising the pickup window in
order to thread in and remove the
component tape
(5) Pickup window (6) Exit from the empty tape duct
(7) Foil rocker (8) Tape disposal rolls
(9) Rear centering pin (10) Operator panel
(11) Status display (12) Removal flap to the foil container
(13) Type plate