00196378-0102_UM X-Feeder_EN - 第51页
Operating Tape Feeder Modules Adjusting the Foil Removal Force on 2x8 mm Feeder Modules Settin g Up the Feeder Module User Manual X Feeder M odules SIPLACE Family 51 4.2.2 Adjusting the Foil Removal Force on 2x8 mm Feede…
Operating Tape Feeder Modules
Setting Up the Feeder Module Inserting / Removing the Spacer (Tape Support)
50 User Manual X Feeder Modules SIPLACE Family
Removing the spacer
►(1) Open the pickup window and lift the spacer out of the centering holes using tweezers or a screw-
driver.
►(2) Push the spacer backwards.
►(3) If the spacer is not needed you can store it in the foil removal flap.
Operating Tape Feeder Modules
Adjusting the Foil Removal Force on 2x8 mm Feeder Modules Setting Up the Feeder Module
User Manual X Feeder Modules SIPLACE Family 51
4.2.2 Adjusting the Foil Removal Force on 2x8 mm Feeder Modules
►Remove the spring with the pin. Use a pair of strong
tweezers or long-nosed pliers to help you.
►Insert the pin with the spring into the new position.
►Fix the spring underneath the rocker using the lugs
provided.
Strong foil removal force: spring position towards the
operator panel
Medium foil removal force: spring position in the middle
Weak foil removal force: spring position towards the tape
conveyor
If the cover foil tears frequently i.e. if the "foil torn" error
occurs, reduce the foil removal force. If the cover foil
sticks to the component tape, increase the foil removal
force.
Operating Tape Feeder Modules
Setting Up the Feeder Module Preparing the Tape Reel
52 User Manual X Feeder Modules SIPLACE Family
4.2.3 Preparing the Tape Reel
►(1) Cut off the adhesive strip at the beginning of the tape material properly.
►(2) Lift off a piece of the protruding cover foil.
The cover foil should protrude at the tape end for approx. 30 cm.
►(3) Cut off the excess tape.
►(4) Insert the prepared tape reel in the tape reel container.
►(5) Fold the protruding cover foil backwards.