00196378-0102_UM X-Feeder_EN - 第94页
Accessories Feeder Module Adapter for the X Series Feeder Module Adapter for the X Series with Label Presenter 94 User Manual X Feeder Modules SIPLACE Family 6.2 Feeder Module Adapter for the X Series The range of X tape…
Accessories
Linear Dipping Unit X (LDU X)
User Manual X Feeder Modules SIPLACE Family 93
6 Accessories
6.1 Linear Dipping Unit X (LDU X)
Description
The Linear Dipping Unit X is used for covering flip chips and CSP components with flux material. The
flux container glides in a linear movement over the dipping plate and applies the flux with a defined layer
thickness into the cavity of the dipping plate. The parameters for covering a component with flux are
specified in SIPLACE Pro. After the component has been covered, the flux layer is renewed. This
process guarantees equal process conditions for the components.
The display field shows the individual menus for actions and operating parameters. Using the buttons of
the operator field you can select the menus or modify and save parameters. The 4 LEDs of the display
field indicate the status of the LDU-X. Use the EMERGENCY OFF button to switch off the LDU-X imme-
diately.
The LDU-X is suitable for the following placement heads:
▪ 6-segment Collect&Place head
▪ 12-segment Collect&Place head
▪ TwinHead
The LDU-X is considered as a separate feeder module type in the setup. The module can only be set up
on component tables of the SIPLACE X series. An implemented warming up function allows to change
the viscosity of the flux material. For testing purposes the LDU-X can be operated outside the machine
by means of the energy and data interface for X feeder modules.
For further information on the LDU-X, please refer to the operating manual supplied with the module.
Linear dipping unit (LDU X)
Item no. 00117011-xx
Legend
1. LDU X
2. Dipping plate
3. Flux tank
4. Display field (4 lines with 20 characters each)
5. Operator panel with 6 foil buttons
6. LED for status displays
7. EMERGENCY STOP button
Accessories
Feeder Module Adapter for the X Series Feeder Module Adapter for the X Series with Label Presenter
94 User Manual X Feeder Modules SIPLACE Family
6.2 Feeder Module Adapter for the X Series
The range of X tape feeder modules has been enhanced by vibration feeders, label presenters and reject
conveyor modules. S-vibration feeders, label presenters and reject conveyor modules can be adapted
for the use on X series component trolleys using an adapter. It is no longer necessary to change the
component trolley docking unit from X series to HF series, if you want to use S-vibration feeders, label
presenters and reject conveyor modules on the machines. In addition to its mechanical function the
adapter also has an electronic function. It converts the communication signals of the S feeders into sig-
nals of the extended X-series protocol. Moreover, additional functions have been implemented, e. g. the
feeder module identification.
6.2.1 Feeder Module Adapter for the X Series with Label Presenter
Adapter plate for label presenter Item no. 00141310-xx
Adapter for S-vibration feeders Item no. 00141305-xx
Adapter plate for Reject Conveyor Item no. 00141308-xx
NOTICE
S-vibration feeders, label presenters and reject conveyors cannot be used on component
trolleys if these are within the access area of a 20 segment Collect&Place head.
Feeder module adapter for the X series with label pre
-
senter
Item no. 00141310-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate for label presenter [00141310-xx]
3. Label presenter
NOTICE! Observe the correct switch setting on
the X feeder adapter.
Use setting 4 for the label presenter.
Accessories
Feeder Module Adapter for the X Series with vibration feeder Feeder Module Adapter for the X Series
User Manual X Feeder Modules SIPLACE Family 95
6.2.2 Feeder Module Adapter for the X Series with vibration feeder
6.2.3 Feeder Module Adapter for the X Series with Reject Conveyor Module
NOTICE
The scope of delivery of the feeder module adapter for the X series also includes an adapter
plate:
Component heights up to 16.5 mm are processed with MIT adapter plate.
Component heights between 16.5 mm and 25 mm are processed WITHOUT adapter plate.
Feeder module adapter for the X series with vibration
feeder
Item no. 00141305-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate 16.5 mm (included in scope of delivery)
3. Vibration feeder
NOTICE! Observe the correct switch setting on
the X feeder adapter.
According to the model, select switch setting 1, 2 or 3 for
the vibration feeder.
Feeder module adapter for the X series with reject con
-
veyor module
Item no. 00141308-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate for reject conveyor [00141308-xx]
3. Reject Conveyor
NOTICE! Observe the correct switch setting on
the X feeder adapter.
Use setting 5 for the reject conveyor.