00196378-0102_UM X-Feeder_EN - 第95页
Accessories Feeder Module Adapter for the X Series with vibration feeder Feeder Module Adapter for the X Series User Manual X Feeder M odules SIPLACE Family 95 6.2.2 Feeder Module Adap ter for the X Series with vibration…
Accessories
Feeder Module Adapter for the X Series Feeder Module Adapter for the X Series with Label Presenter
94 User Manual X Feeder Modules SIPLACE Family
6.2 Feeder Module Adapter for the X Series
The range of X tape feeder modules has been enhanced by vibration feeders, label presenters and reject
conveyor modules. S-vibration feeders, label presenters and reject conveyor modules can be adapted
for the use on X series component trolleys using an adapter. It is no longer necessary to change the
component trolley docking unit from X series to HF series, if you want to use S-vibration feeders, label
presenters and reject conveyor modules on the machines. In addition to its mechanical function the
adapter also has an electronic function. It converts the communication signals of the S feeders into sig-
nals of the extended X-series protocol. Moreover, additional functions have been implemented, e. g. the
feeder module identification.
6.2.1 Feeder Module Adapter for the X Series with Label Presenter
Adapter plate for label presenter Item no. 00141310-xx
Adapter for S-vibration feeders Item no. 00141305-xx
Adapter plate for Reject Conveyor Item no. 00141308-xx
NOTICE
S-vibration feeders, label presenters and reject conveyors cannot be used on component
trolleys if these are within the access area of a 20 segment Collect&Place head.
Feeder module adapter for the X series with label pre
-
senter
Item no. 00141310-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate for label presenter [00141310-xx]
3. Label presenter
NOTICE! Observe the correct switch setting on
the X feeder adapter.
Use setting 4 for the label presenter.
Accessories
Feeder Module Adapter for the X Series with vibration feeder Feeder Module Adapter for the X Series
User Manual X Feeder Modules SIPLACE Family 95
6.2.2 Feeder Module Adapter for the X Series with vibration feeder
6.2.3 Feeder Module Adapter for the X Series with Reject Conveyor Module
NOTICE
The scope of delivery of the feeder module adapter for the X series also includes an adapter
plate:
Component heights up to 16.5 mm are processed with MIT adapter plate.
Component heights between 16.5 mm and 25 mm are processed WITHOUT adapter plate.
Feeder module adapter for the X series with vibration
feeder
Item no. 00141305-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate 16.5 mm (included in scope of delivery)
3. Vibration feeder
NOTICE! Observe the correct switch setting on
the X feeder adapter.
According to the model, select switch setting 1, 2 or 3 for
the vibration feeder.
Feeder module adapter for the X series with reject con
-
veyor module
Item no. 00141308-xx
Legend
1. Adapter for feeder modules of the X series
[00141305-xx]
2. Adapter plate for reject conveyor [00141308-xx]
3. Reject Conveyor
NOTICE! Observe the correct switch setting on
the X feeder adapter.
Use setting 5 for the reject conveyor.
Accessories
Energy and Data Interface (Single Slot EDIF) for X Feeder Modules Description
96 User Manual X Feeder Modules SIPLACE Family
6.3 Energy and Data Interface (Single Slot EDIF) for X Feeder
Modules
6.3.1 Description
By means of the energy and data interface X feeder modules can be put into operation outside the
machine and the pre-setup location. The interface consists of an Omega profile for taking in and guiding
the feeder modules. Like on the component trolley the feeder module is placed on the Omega profile
with its sliding guides and pushed forwards until the front centering pin completely immerges into the
hole. The locking latch locks the feeder module in this position.
For removing the feeder module press the unlocking button. The locking latch is pressed down and
releases the feeder module. Foldout feet stabilize the position of the energy and data interface, namely
for broad feeder modules.
The electronic housing contains the control electronic for the energy and data interface. The operator
panel consists of a start and and stop button as well as two LEDs for the status display. Communication
with the PC is carried out via the data cable. The power supply cable is connected to the power supply
which is contained in the scope of delivery.
6.3.2 Usage
The energy and data interface is used for checking, maintaining and repairing X feeder modules. In
addition, it can be used for offline setups in the PCB production. For this purpose, the energy and data
interface is fitted on the base plate. The reel holder is also mounted to the base plate. When the compo-
nent tape is inserted you can either check or change the values for pitch, pickup position and transport
speed.
A detailed operating manual describes the handling of the interface and the corresponding service
works.
6.3.3 Scope of Delivery
▪ Single Slot EDIF
▪ Power supply, 100 - 120 / 200 - 240 V~, +30 V-, 4.3 A
▪ Base plate with reel arm
▪ Operating manual
Energy and data interface for X feeder modules
Item no. 00141247-xx
Legend
1. Unlocking button for releasing the locking latch
2. Operator panel
3. Data cable
4. Power supply cable
5. Electronic housing
6. Foldout feet
7. Omega profile for guiding the feeder modules
8. Locking latch
9. Hole for the front centering pin of the feeder module
10. Base plate
11. Reel holder