00193368-02 - 第109页

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Version GEM 503.02 HOST Inter fac e Manual ©Siemens AG, all rights reser ved page 109 of 243 4.7.9 S5F71 - A lar m Report Block Send S5F71 [W ] * H<-E <L [2] <U1 0>…

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Version GEM 503.02

HOST Interface Manual

The high-order bit of ALCD will be "1" if this alarm is currently On (Unsafe), or "0" if it is

currently Off (Safe). The low-order seven bits of ALCD contain the severity code for this

alarm.

For any invalid ALID specified in S5F5, the corresponding entry in S5F6 has the following

special error format:

<L [3]

<B> * ALCD - alarm On/Off and Severity Code

<U4 ALID> * Alarm ID

<A> * ALTX - Alarm Text

If S5F5 specified all alarms, S5F6 reports alarms in order by alarm ID.

4.7.7 S5F7 - List Enabled Alarms Request

S5F7 W . * H->E

The Host requests the Equipment to send the current status of all Alarm IDs which are

currently enabled (See S5F3).

4.7.8 S5F8 - List Enabled Alarm Data

S5F8 * H<-E, Multiblock

<L [3]

<B [1] ALCD> * ALCD - Alarm On/Off and Severity

Code

<U4 ALID> * Alarm ID

<A ALTX> * ALTX - Alarm Text

...

> .

The high-order bit of ALCD will be "1" if this alarm is currently On (Unsafe), or "0" if it is

currently Off (Safe). The low-order seven bits of ALCD contain the severity code for this

alarm.

S5F8 contains only those ALIDs which are currently enabled for reporting (See S5F3).

S5F8 reports alarms in order by Alarm ID.

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Version GEM 503.02

HOST Interface Manual

4.7.9 S5F71 - Alarm Report Block Send

S5F71 [W] * H<-E

<L [2]

<U1 0> * ALPY Alarm Priority

<L [1]

<L [4]

<U4 ALID> * ALID - Alarm ID

<BOOLEAN ASTAT> * T = Alarm On

F = Alarm Off

<U4 ASER> * ASER Alarm Serial Number

<A [16] 'YYYYMMDDhhmmsscc'> * CLOCK

> .

Note: This message is provided only for compatibility with Host computers which support

an older version of GEM.

If the Equipment Constant "ConfigAlarms" is set to "1", the Equipment sends S5F71

instead of the normal S5F1 Alarm Notification Send.

The SIPLACE reports that an alarm condition has changed.

ALID identifies the Alarm.

ASTAT value is "True" (Non-zero) if this alarm is currently On (Unsafe), or "False" (Zero)

if it is currently Off (Safe).

ASER (Alarm Serial Number) is assigned by the Equipment. Its value begins at "1" and is

incremented by 1 for each alarm reported.

ALPY (Alarm Priority) is always zero.

CLOCK indicates the date and time of the alarm change.

Equipment Constant "Wbits5" controls whether the Equipment sends S5F71 with w-bit =

"1" (Reply Expected) or "0" (No Reply Expected).

4.7.10 S5F72 - Alarm Report Block Acknowledge

S5F72 * H->E

<L> .

The Host acknowledges Alarm Report. This Equipment ignores the data portion of

S5F72.

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Version GEM 503.02

HOST Interface Manual

4.7.11 S5F73 - Alarm Report Block Acknowledge

S5F73 [W] * H<-E

<L [3]

<U4 ALID> * ALID - Alarm ID

<BOOLEAN ASTAT> * T = Alarm On,

F = Alarm Off.

<A [16] 'YYYYMMDDhhmmsscc'> * TIMESTAMP

> .

Note: This message is provided only for compatibility with older Host computers which

support GEM 3.1.

In order for this message to be used, the Equipment Constant "ConfigAlarms" must be set

to "2".

The SIPLACE reports that an alarm condition has changed.

ALID identifies the Alarm.

ASTAT value is "True" (Non-zero) if this alarm is currently On (Unsafe), or "False" (Zero)

if it is currently Off (Safe).

TIMESTAMP indicates the date and time of the alarm change.

Equipment Constant "WBitS5" controls whether the Equipment sends S5F73 with W-Bit