00194579-0202 - 第51页
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4 08/2006 Edition 53 : In the "Conveyor“ view , switch to the "Options and configuration“ subview . : Run the extended conveyor configur ation &quo…
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
52
: Fit the limit switch on the new mount and then on the bearing flange of the conveyor side wall.
2
2
: Move the stationary conveyor side wall 5 x 10 mm increments to the original position.
2
Do not accept the setting. 2
2
2
2
2
2
Assembly tray limit
switch new position
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
53
: In the "Conveyor“ view, switch to the "Options and configuration“ subview.
: Run the extended conveyor configuration "Position of fixed edge“ with
"Standard width / Excess width HS-60 (wide HS-60) / Excess width HF series (wide HF
series)“.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
54
For the HS-60 / D4 only:
A dialog appears to prompt that hardware changes are required: 2
2
2
: Once all the hardware changes have been carried out, confirm the dialog and thus start chan-
ging the position of the stationary side wall to "Wide“.
For the HS-60 machine type only:
If the side wall was moved, a dialog appears to inform the service engineer that the conveyor side
wall must be fixed again. Carry out the following steps to fix the conveyor side wall: 2
2
2