00196845-02_AI_Vakuumpumpe_SXDX4_X-Serie-S_de_en - 第76页

Introduction Staff Qualifications and Training 1.3.5 SIPLACE on the World Wid e Web (WWW) 76 Vacuum Pump Vakuumpumpe 1.4 1 . 4 S t a f f Q u a lif ic a t io n s a n d T r a in in g Staff Qualifications and Training Quali…

Introduction

1.3.4 Release History Other Instructions

Vacuum Pump Vakuumpumpe 75

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD foam,

ESD bag or container).

Do not bring modules near visual display units, monitors or televisions. Keep them at least 10 cm away

from the screen.

1.3.3.4

1.3.3.4 Measurements and Modifications to ESD Modules

Measurements and Modifications to ESD Modules

Measurements of the assemblies may only be taken if

▪ The measuring device has been grounded (e.g. via protective conductor) or

▪ The measuring head of the potential-free measuring device has been briefly discharged before

measurement (e.g. touching blank metal control unit housing).

► Always use an earthed soldering iron if you carry out any soldering work.

1.3.3.5

1.3.3.5 Dispatching ESD Modules

Dispatching ESD Modules

► Always store modules and components in conductive packaging (e.g. metallized plastic bags or met-

al sleeves) and dispatch them in conductive packaging.

► If the packaging is not conductive, place the modules in a conductive envelope before packaging.

Use conductive foam rubber, ESD bags, domestic aluminum foil or paper, for example. NEVER use

plastic bags or film.

► If the module has integral batteries, ensure that the conductive packaging does not touch or short-

circuit the battery terminals and, if necessary, first cover the terminals with insulating tape or mate-

rial.

1.3.4

1.3.4 Release History

Release History

1.3.5

1.3.5 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE

homepage at http://www.siplace.com.

► You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the

SIPLACE User Group

. Here you can call up spe-

cial information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

Release Changes

10/2013 First edition

02/2014 Additional feature:

▪ Retrofit kit heat dissipation

▪ Preventive maintenance vacuum pump: service life correction

▪ Note Proportional controller (pressure control valve)

Introduction

Staff Qualifications and Training 1.3.5 SIPLACE on the World Wide Web (WWW)

76 Vacuum Pump Vakuumpumpe

1.4

1.4 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op-

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-

ance with normal safety standards.

▪ Have received first aid training.

1.5

1.5 Abbreviations

Abbreviations

Abbreviations Description

BB, BB1, BB2 Placement area, Placement area 1, Placement area 2

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

C&P12, CP12 Collect&Place head with 12 segments

C&P20, CP20 Collect&Place head with 20 segments

C&P6, CP6 Collect&Place head with 6 segments

CPP Collect&Pick&Place head

CPx Collective term for CPP, CP20, CP12 and/or CP6

CP20x Collective term for C&P20, C&P20A, C&P20M and C&P20P

DC Dual conveyor with 2 lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

SC Single conveyor with 1 lane

FHE Fast Head Exchange

PCB Board

P&P Pick&Place

QC Quad lane conveyor with 4 lanes

SCS Single Core Solution

SC Station computer

TH TwinHead

VS Vision system type

WPC Wafflepack Changer

WPC4/5/6 Waffle Pack Changer version 4/5/6

ID Intermediate distributor

ID1, ID2 Intermediate distributor 1, intermediate distributor 2

Brief description

Vacuum Pump Vakuumpumpe 77

2 Brief description

Brief description

Every Collect&Place head has a separate vacuum generator that supplies the holding and placement

circuit with the vacuum that it needs.

The vacuum generator for the placement heads works according to the Venturi principle. In combination

with a vacuum pump, the compressed air consumption can be significantly reduced for the SpeedStar

(C&P20A) head. The ongoing operating costs are reduced according to the energy costs.

NOTICE

Maximum of two C&P20 A heads

This vacuum pump can supply a maximum of two C&P20 A heads. If using an SX4 with four

C&P20 A heads, you therefore need two vacuum pumps. These vacuum pumps are fitted at

locations 1 and 4, behind the COT inserts in the machine base.

NOTICE

Changeover

If you need to convert a gantry from C&P20A to TwinHead or CPP head, you must re-establish

the original compressed air supply for this gantry. Conversion reversal must be performed on

all assemblies for this gantry.

NOTICE

Partial conversion

Partial conversion of the pneumatic unit, for example, involving disconnection of the gantry hos-

es (additional vacuum hoses) during compressed air operations, can lead to serious placement

machine malfunctions.

NOTICE

Retrofitting

If you need to convert a gantry from TwinHead or CPP head to C&P20A head with vacuum

function, you must retrofit the vacuum equipment for this gantry.

NOTICE

Compressed air operation

If you operate a C&P head which has been converted for vacuum operation at a gantry with

compressed air, this could lead to serious damage to the placement head if the silicon hoses

to the segments should loosen.

NOTICE

Folded hoses

Make sure that the hoses are never folded or pinched, not even during unpacking, as this

makes them unsuitable for further use.