00191376-07 - 第73页

HS Preventive Maintenance 8 Annual maintenance work 01/2006 US Edition 73 Check th e protectiv e covers 8 a Open the prote ctive c overs to a h eight of 10 0 mm ( +/-5mm) m easured bet ween the machine frame an d the ed …

100%1 / 86
8 Annual maintenance work HS Preventive Maintenance
01/2006 US Edition
72
8
HS Preventive Maintenance 8 Annual maintenance work
01/2006 US Edition
73
Check the protective covers 8
a Open the protective covers to a height of 100 mm (+/-5mm) measured between the machine
frame and the edge of the protective cover. Replace the damping cylinder if the damping cyl-
inder covers cannot be held open reliably at this height.
8
: Close the protective covers.
8
Clean the protective covers 8
: Check the Plexiglas surfaces of the protective covers for dirt.
: Clean them with a dry lint-free cloth if necessary.
If they are very dirty, moisten the cloth with ethyl alcohol.
8
Apply as little pressure as possible when cleaning the protective covers to avoid damaging the
ESD coating. 8
8
8
: Repeat these tasks at every placement machine of the line.
: Switch the placement system on again at the main switch.
8
8
8
8
8
8
8
8
8
8
8
9 Maintain the sleeves HS Preventive Maintenance
01/2006 US Edition
74
9 Maintain the sleeves
9