Portal_Manual_1.2.1_Rev_H-1.pdf - 第64页

Portal PVA Revisio n H ( 2018 ) 64 of 93 12.3 Unsolicited C on nection The Unsolic ited C onnec tion tab has t he settings for the system messages commu nication between the Galil and Portal. • The Unsolic ited H andle a…

100%1 / 93
Portal
PVA
Revision H (2018)
63 of 93
12.2 Primary Connection
The Primary Connection tab has the settings for the primary handshaking between the
Galil and Portal.
• The Primary Handle and Type must be different from the settings for the
unsolicited connection.
• Select the arrow next to the setting to select a setting from the drop down
menu.
• You can select “Defaults” at any time to return the Primary Connection settings
to the default factory settings.
Figure 60: PotalComms Primary
Portal
PVA
Revision H (2018)
64 of 93
12.3 Unsolicited Connection
The Unsolicited Connection tab has the settings for the system messages
communication between the Galil and Portal.
• The Unsolicited Handle and Type must be different from the settings for the
primary connection.
• Select the arrow next to the setting to select a setting from the drop down
menu.
• You can select “Defaults” at any time to return the Unsolicited Connection
settings to the default factory settings.
Figure 61: PortalComms Unsolicited
Portal
PVA
Revision H (2018)
65 of 93
13 DataView
The Portal Dataview application can run as a standalone application or as an embedded
version within PVAPortal. The standalone version can be resized, maximized or
minimized. The embedded version in the Log tab on the main Portal screen and has a
fixed dimension that is sized accordingly. Additional configuration of each version of the
DataView app is handled in the Portal Sysconfig.ini file. Refer to the ini configuration
parameters listed below for more information.
Figure 62: Log File
13.1 Startup Log File
PVAPortal can write data to any of 10 different log files, however, DataView can only
Display the content of one log file at a time. On startup, the default log file is loaded
into DataView.
The default log is configured by setting the ‘InitialLogFile’ key in the [DataView] section
of the configuration files.
To load a log file other than the initial log file:
1. With DataView is running in the standalone version, select the File -> Open File
on the menu bar.
Figure 63: Open File from Standalone DataView
2. Select the log file you want to view.