TR7600 SIII_Series_Installation_en_v_2_0_2 - 第24页
Test Research, Inc . TR7600 SII I Series U ser Guide – I nstallatio n 14 Figure 23: Uninstall Mounting Brackets 3) Open the rear door and uninstall t he tube mounting bracket. Figure 24 : Uninstall the Mount ing Brack et
Test Research, Inc.
13 TR7600 SIII Series User Guide – Installation
2.3 Check the Accessories
This machine has been thoroughly inspected and tested prior to packing and is ready for
operation. After unpacking carefully, inspect for any damage. If damage is found, file an
immediate claim with the responsible transport service.
The container should contain the following items:
1) Main machine
2) Basic components:
X-Ray Tube
Computer
Keyboard
Mouse
Monitor
Accessories box.
3) After unpacking, you should count the accessories to confirm if the shipping contents are
correct.
2.4 Uninstall Mounting Brackets
1) Open the front door and uninstall the X-Y table mounting brackets. Please keep the
screws with the brackets and do not screw them back to the machine.
Note: Dismantled brackets, screws and gaskets should be kept so that these items
can be used next time when the system needs to be moved.
2) From the front view of the machine, you can see the items listed below.
2 mounting brackets on the lower X axis.
1 mounting bracket (the connection end) on the lower Y axis.
2 mounting brackets on the lower Y axis.
12 hexagonal screws (M6x16 NI) and 20 gaskets (M6 NI 6.4x12x1.6) with these
mounting brackets.
Please uninstall all of them. Keep the screws and gaskets with the brackets and do not
screw them back to the machine.
Test Research, Inc.
TR7600 SIII Series User Guide – Installation 14
Figure 23: Uninstall Mounting Brackets
3)
Open the rear door and uninstall the tube mounting bracket.
Figure 24: Uninstall the Mounting Bracket
Test Research, Inc.
15 TR7600 SIII Series User Guide – Installation
4) Uninstall the mounting brackets of the upper X-Y table.
Figure 25: Uninstall Mounting Brackets
5) From the rear view of the machine, you can see the items listed below.
1 mounting bracket on the tube X axis.
2 types of brackets on the lower Y axis. Each bracket type has 2 pieces.
2 types of
hexagonal screws. One type has 4 hexagonal screws (M5x12 NI) and the
other type has 12 hexagonal screws (M6x16 NI).
2
types of gaskets
. One type has 4 gaskets (M5 NI 5.3x10x1) and the other type
has 12 gaskets (M6 NI 6.4x12x1.6).
Please uninstall these items. Keep the screws and gaskets with the brackets and do not
screw them back to the machine.
Figure 26: Release These Two Screws First
6) There are a total of 10 mounting brackets and 36 screws and 36 gaskets. Please put
them in a plastic bag and keep them for future use.