OM-1078-002 - 第116页

*3 "T ray Set" Group Box Parameters can be set in the "Step", "Block", "Matrix X", and "Matrix Y" text boxes in this group box for the objective tray of the feeder select…

5.3.6 "Feeder No. Set" Sheet

This sheet makes it possible to set the objective feeder No. for teaching.

• Sheet Layout

When the [Fdr. No. Tray Set] button is pressed in the "Tray Teach

Pick-Up Pos. [Comp. Center Pos.]", the "Tray Teach Ecc. Pick-Up

Pos. [Pickup Loc. Adj]", or the "Tray Matrix Pitch XY-Side Length"

sheet, the following sheet appears.

Fig. B27 "Feeder No. Set" Sheet

• Sheet Composition

*1 "Component Data Lookup Mode" Group Box

The provided buttons make it possible to specify the feeder base on

which the feeder to be taught is installed.

When the [Tray F700] or the [Tray F800] button is pressed, the feed-

ers on the selected feeder base are displayed in the "Feeder" list

box (*2).

*2 "Feeder" List Box

Listed are the multi-layer tray feeders specified in the "Component

Data Lookup Mode" group box (*1).

0311-002 2-42

AHI01EGP

5.3 "TEACHING" Window (Submenu)

*3 "Tray Set" Group Box

Parameters can be set in the "Step", "Block", "Matrix X", and "Matrix

Y" text boxes in this group box for the objective tray of the feeder

selected in the "Feeder" list box (*2).

*4 [Set] Button

The feeder selected in the "Feeder" list box (*2) is set as the objec-

tive feeder No. for teaching.

*5 [Return] Button

When this button is pressed, the previous sheet (the "Tray Teach

Pick-Up Pos. [Comp. Center Pos.]", the "Tray Teach Ecc. Pick-Up

Pos. [Pickup Loc. Adj]", or the "Tray Matrix Pitch XY-Side Length"

sheet) appears.

• Operation Procedure

Follow the steps below to specify the feeder No. to be taught.

(1) Specify the multi-layer tray.

The feeder Nos. of the specified multi-layer tray are displayed in

the "Feeder" list box (*2).

(2) Specify a feeder No.

(3) Press the [Set] button (*4).

The objective feeder No. for teaching is determined.

(4) Press the [Return] button.

The "Feeder No. Set" sheet closes and the "Pick-Up Location"

tab sheet appears.

0204-001 2-43

AHI01EGP

5.3 "TEACHING" Window (Submenu)

5.3.7 "Tray Unit Adj." Sheet

• Sheet Layout

When the [Tray Unit Adj.] button is pressed in the "Tray Teach Pick-

Up Pos. [Comp. Center Pos.]", the "Tray Teach Ecc. Pick-Up Pos.

[Pickup Loc. Adj]", or the "Tray Matrix Pitch XY-Side Length" sheet,

the following sheet appears.

Fig. B28 "Tray Unit Adj." Sheet

• Sheet Composition

*1 "Operation" Group Box

[Elevator Upward Movement] Button

When this button is selected and the [ON] button (entitled "MOVE")

is pressed, the elevator shaft moves up as far as 1 pitch of the

pallet.

[Elevator Downward Movement] Button

When this button is selected and the [ON] button (entitled "MOVE")

is pressed, the elevator shaft moves down as far as 1 pitch of the

pallet.

[Pallet Change Position] Button

When this button is selected and the [ON] button (entitled "MOVE")

is pressed, the elevator shaft moves to the pallet change position.

0311-002 2-44

AHI01EGP

5.3 "TEACHING" Window (Submenu)