OM-1078-002 - 第124页
1. 2 Pattern Program 1.2.1 Placement Feeder Location (B02) TRA Y #2 F701-F799 and TRA Y #2 F801-F899 It can be determined which components must be used and which feeder No. (Fdr . No.) of the multi-layer tray feeder must…
1.1.2 Composition of Placement Feeder Location Data
The set parameters are used to determine which feeder slot Nos. (Fdr.
Nos.) various types of components should be allocated to.
The allocated component IDs (types) must be specified for the multi-
layer tray feeder.
Refer to "2.4 Placement Feeder Location Data" in "Section 2" (the in-
struction manual (Vol. 3: Programming and Machine Data) of the main
machine) for details.
B02 TRAY #2 F701-F799 and TRAY #2 F801-F899
Table C1
Ref. No. Data Name
B02_01 Fdr. No.
B02_02 Component ID
B02_03 C
B02_04 Comment
B02_05 Library Comment
B02_06 Dir [deg], Carrier Data Type
B02_07 Nozzle #1, C, Nozzle #2, C
B03 TRAY #2 STEP
Table C2
Ref. No. Data Name
B03_01 Tray #2 Step No. Offset
B03_02 Step
B03_03 Block 1 through Block 9
1.1 Outline of Pattern Program
0311-002 3-3 AHI01EGP
1.2 Pattern Program
1.2.1 Placement Feeder Location
(B02) TRAY #2 F701-F799 and TRAY #2 F801-F899
It can be determined which components must be used and
which feeder No. (Fdr. No.) of the multi-layer tray feeder must
be loaded with the selected components.
The following shows the positional relation between the feeder
bases.
Fig. C1
1.2 Pattern Program
0311-003 3-4 AHI01EGP
Feeder Base #3
(Rear Side of Machine)
Feeder Base #1
Feeder Base #2
(Multi-Layer Tray Feeder)
Feeder Base #4
(Front Side of Machine)
Note
Fig. C2 Edit Window (Example)
(B02_01) Fdr. No.
Shown are the feeder Nos. in the placement feeder location
data.
The numbers in ( ) indicate the feeder Nos. that will actually
be loaded with components.
Data Input Range
Multi-Layer Tray Feeder: 701 to 799
Multi-Layer Tray Feeder: 801 to 899
Fig. C4
1.2 Pattern Program
Fig. C3
Fdr. No.
701
0311-003 3-5 AHI01EGP
101 to 132
432 to 401
332 to 301
701 to 799
801 to 899
(Front Side of Machine)
(Rear Side of Machine)
Feeder Base #1
Feeder Base #2
(Multi-Layer Tray Feeder)
Feeder Base #4
Feeder Base #3