OM-1078-002 - 第129页

*2 Fdr . No. Shown under this title are the feeder Nos. Refer to " • • • • • Operation Procedure" (described later) for the detailed information on how to add or delete feeder Nos. (Fdr . Nos.). *3 Component ID…

1.3 "Placement Feeder Location" Tab

1.3.1 "TRAY #2 F701-F799" Tab

••

• Sheet Layout

When the "TRAY #2 F701-F799" tab is pressed in the "Placement

Feeder Location" tab sheet, the following tab sheet appears.

Follow the same procedure to make the "TRAY #2 F801-F899"

tab sheet visible.

Fig. C11 "TRAY #2 F701-F799" Tab Sheet

••

• Sheet Composition

Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" (the

instruction manual (Vol. 3: Programming and Machine Data) of

the main machine) for the detailed information on how to enter

parameters.

*1 [Component ID List] Icon

When this icon is pressed, the "Component ID List" window opens.

This window enables you to select a component ID from the com-

ponent library and allocate it to an arbitrary feeder (Fdr. No.).

Refer to "4.3.2 "Component ID List" Window" in "Section 2" (the

instruction manual (Vol. 3: Programming and Machine Data) of the

main machine) for details.

1.3 "Placement Feeder Location" Tab

0311-002 3-8 AHI01EGP

*2 *3

Note

*2 Fdr. No.

Shown under this title are the feeder Nos.

Refer to "

••

• Operation Procedure" (described later) for the

detailed information on how to add or delete feeder Nos.

(Fdr. Nos.).

*3 Component ID

Displayed are the currently allocated component IDs.

Refer to "4.3.2 "Component ID List" Window" in "Section

2" (the instruction manual (Vol. 3: Programming and Ma-

chine Data) of the main machine) for the detailed informa-

tion on how to enter or delete component IDs.

*4 C, Comment

Enter parameters in these text boxes.

Fig. C11-1 "TRAY #2 F701-F799" Tab Sheet

*5 Library Comment, Dir [deg], Carrier Data Type, Nozzle #1, C,

Nozzle #2, C

Displayed are the parameters specified in the component library.

••

• Operation Procedure

Refer to "4.3 "Placement Feeder Location" Tab" in "Section 2"

(the instruction manual (Vol. 3: Programming and Machine Data)

of the main machine) for details.

1.3 "Placement Feeder Location" Tab

0311-002 3-9 AHI01EGP

Note

1.3.2 "TRAY #2 STEP" Tab

••

• Sheet Layout

When the "TRAY #2 STEP" tab is pressed in the "Placement Feeder

Location" tab sheet, the following tab sheet appears.

Fig. C12 "Tray #2 Step" Tab Sheet

••

• Sheet Composition

Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" (the

instruction manual (Vol. 3: Programming and Machine Data) of

the main machine) for the detailed information on how to enter

parameters.

*1 Tray #2 Step No. Offset

Enter parameters in this text box.

*2 Step

Displayed are the step Nos.

*3 Block 1 through Block 9

Enter parameters in these text boxes.

1.3 "Placement Feeder Location" Tab

0311-002 3-10 AHI01EGP

Note