OM-1078-002 - 第131页
• • • • • Editing of T ray #2 Step Information Data Operation Procedure (1) When the step to be edited is selected in the "TRA Y #2 STEP" tab sheet (Fig. C12), the "T ray #2 Step Information" window o…
1.3.2 "TRAY #2 STEP" Tab
••
••
• Sheet Layout
When the "TRAY #2 STEP" tab is pressed in the "Placement Feeder
Location" tab sheet, the following tab sheet appears.
Fig. C12 "Tray #2 Step" Tab Sheet
••
••
• Sheet Composition
Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" (the
instruction manual (Vol. 3: Programming and Machine Data) of
the main machine) for the detailed information on how to enter
parameters.
*1 Tray #2 Step No. Offset
Enter parameters in this text box.
*2 Step
Displayed are the step Nos.
*3 Block 1 through Block 9
Enter parameters in these text boxes.
1.3 "Placement Feeder Location" Tab
0311-002 3-10 AHI01EGP
*2
*1
*3
Note
••
••
• Editing of Tray #2 Step Information Data
Operation Procedure
(1) When the step to be edited is selected in the "TRAY #2 STEP" tab
sheet (Fig. C12), the "Tray #2 Step Information" window opens.
Fig. C13 "Tray #2 Step Information" window
(2) Select the "Position Offset X status" text box and set Reference
Point X of the block.
(3) Select the "Position Offset X [mm]" text box and set the reference
coordinate of the tray based on the pallet reference position of the
block.
(4) Select the "Position Offset Y [mm]" text box and set the reference
coordinate of the tray based on the pallet reference position of the
block.
(5) When the "C" text box is selected, a control command can be set in
the text box.
1.3 "Placement Feeder Location" Tab
0311-002 3-11 AHI01EGP
2. Component Library
Refer to "Section 3 Component Library" (the instruction manual
(Vol. 3: Programming and Machine Data) of the main machine)
for details.
2.1 "Carrier Data" Tab
The corresponding tab sheet appears when "Cylindrical", "Square", "De-
form (Simple)", "Deform (Complex)", "Connector (Simple)", "Connector
(Complex)", "Other Leaded (Simple)", "Other Leaded (Complex)", or
"BGA/CSP" is selected in the "Component shape" text box.
••
••
• Sheet Layout
When the "Carrier Data" tab is pressed, the "Carrier Data" tab sheet
appears.
Fig. C14 "Carrier Data" Tab Sheet
••
••
• Sheet Composition
Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" (the
instruction manual (Vol. 3: Programming and Machine Data) of
the main machine) for the details.
Enter parameters in these text boxes.
2. Component Library
0311-002 3-12 AHI01EGP
Note
Note