OM-1078-002 - 第140页
031 1-002 3-20 AHI01EGP T ray matrix reference setup Select "Left" or "Right". T ray matrix initialization mode "Standard", "Hold", or "Initialize" can be selected. Stand…
0311-002 3-19 AHI01EGP
Example: The tray is in the condition (in the middle of process)
shown in Fig. C19.
(Tray in Middle of Process)
Fig. C19
• The first component pick-up position is assumed to be "X: 3, Y: 2".
z : Component Picked Normally
{ : Component Left Behind
Shadowed : Mispick
Fig. C20 Fig. C21
3.2 Auto Operation
1
1
2
99
.
23 99
X
Y
.
.
.....
.
: No Components (Already taken out)
: Components
1
1
2
99
.
23 99
X
Y
.
.
......
Selection of "Y Direction"
Selection of "X Direction"
1
1
2
99
.
23 99
X
Y
.
.
......
0311-002 3-20 AHI01EGP
Tray matrix reference setup
Select "Left" or "Right".
Tray matrix initialization mode
"Standard", "Hold", or "Initialize" can be selected.
Standard : When the same or no component IDs are speci-
fied in the tray matrix data of the current pattern
program after the program change operation, the
tray matrix data will be used continuously.
When different component IDs are specified after
the program change operation, the matrices (posi-
tional coordinates) will be cleared to (0,0).
Hold : When the same or no component IDs are speci-
fied in the tray matrix data of the current pattern
program after the program change operation, the
tray matrix data will be used continuously.
When different component IDs are specified after
the program change operation, the matrices (posi-
tional coordinates) will be cleared to (1, 1).
Initialize : All matrices (positional coordinates) in the current
tray matrix data will be cleared to (1, 1).
Tray tall component mode
"Enable" or "Disable" can be selected.
3.2 Auto Operation
031 1-001 3-21 AHI01EGP