OM-1078-002 - 第22页
3. About W arning Labels Please read "3.1 W arning Label Positions" and "3.2 W arning Labels and Description" carefully to fully understand the meaning of each precau- tionary point for safety precaut…
0311-003 19 AHI01EGP
2.5 Pre-Installation Checks
If the machine is installed in unsatisfactory environmental conditions, it
may malfunction due to damage or breakdown.
To avoid this, make preparations to install the machine as follows.
If the machine is scheduled to be transferred to another place, please
contact our marketing department or sales agency beforehand.
• Select a place solid enough to support
the weight of the machine.
Ref.: It is recommended that the ma-
chine should be installed on the
first floor. When the machine has
to be installed on a floor other
than the first one, please contact
our marketing department or
sales agency for details.
• Avoid any place that vibrates severely.
• Ambient temperature must be
20±10°C and humidity 30% to 80%.
Any dew condensation must be
avoided.
• Ensure that the selected place is free
of electric noise.
Precautionary measures (prevention of
noise generation, etc.) must be taken
for other equipment to prevent malfunc-
tions.
2.5 Pre-Installation Checks
Fig. X11
Fig. X13
Fig. X12
Fig. X14
3. About Warning Labels
Please read "3.1 Warning Label Positions" and "3.2 Warning Labels and
Description" carefully to fully understand the meaning of each precau-
tionary point for safety precautions.
3.1 Warning Label Positions
The warning labels are affixed to hazardous and special attention-re-
quired areas.
Refer to "3.2 Warning Labels and Description" for details.
3. About Warning Labels
0311-003 20 AHI01EGP
Fig. X15 Fig. X16
*2
*3
*1-2
*1-2
*1-2
*1-2
*5
*2
*3
Fig. X17
*4
*6
*5
*1-1
*2
*3
No. Warning Labels and Description
*1
Description
• The labeled sections use high voltage.
Do not touch any part of these sections avoiding any electric shock.
*2
Description
• Do not step on the machine.
Otherwise, you may fall down from the machine and get injured.
The machine will also break down.
*3
Description
• Do not operate the machine with the door being kept open. Otherwise, part of your
body may be trapped in the moving mechanisms, causing an injury.
*4
Description
• Only the trained personnel should operate the machine. Otherwise, an electric shock
or an injury may not be avoided.
or
*1-1
*1-2
DANGER
High Voltage Area!
Avoid electric shock.
3.2 Warning Labels and Description
3.2 Warning Labels and Description
Table X1
0204-002 21 AHI01EGP
WARNING
Stepping on Machine
Prohibited!
Otherwise, an injury will result due
to breakage of the machine.
WARNING
Keep the door closed during
operation.
Do not keep the door open during operation.
Otherwise, part of your body may be trapped
in the moving mechanisms, causing an injury.
WARNING
Trained Personnel Only!
Electric Shock or Hazardous Area