OM-1078-002 - 第24页

No . W arning Labels and Description *5 Description • Pay attention to the moving mechanisms. Otherwise, you may be trapped in the moving mechanism, causing a major injury . • When a door is opened or closed, be sure to …

100%1 / 223
No. Warning Labels and Description
*1
Description
• The labeled sections use high voltage.
Do not touch any part of these sections avoiding any electric shock.
*2
Description
• Do not step on the machine.
Otherwise, you may fall down from the machine and get injured.
The machine will also break down.
*3
Description
• Do not operate the machine with the door being kept open. Otherwise, part of your
body may be trapped in the moving mechanisms, causing an injury.
*4
Description
• Only the trained personnel should operate the machine. Otherwise, an electric shock
or an injury may not be avoided.
or
*1-1
*1-2
DANGER
High Voltage Area!
Avoid electric shock.
3.2 Warning Labels and Description
3.2 Warning Labels and Description
Table X1
0204-002 21 AHI01EGP
WARNING
Stepping on Machine
Prohibited!
Otherwise, an injury will result due
to breakage of the machine.
WARNING
Keep the door closed during
operation.
Do not keep the door open during operation.
Otherwise, part of your body may be trapped
in the moving mechanisms, causing an injury.
WARNING
Trained Personnel Only!
Electric Shock or Hazardous Area
No. Warning Labels and Description
*5
Description
• Pay attention to the moving mechanisms. Otherwise, you may be
trapped in the moving mechanism, causing a major injury.
• When a door is opened or closed, be sure to hold the grip firmly and
slowly move the door up or down. Otherwise, your hand may be
trapped in the moving mechanisms, causing a major injury.
*6
Description
• Pay attention to the moving mechanisms. Otherwise, part of your body may be trapped
in the moving mechanisms.
3.2 Warning Labels and Description
Table X2
0204-002 22
AHI01EGP
WARNING
Moving Mechanisms!
4. Safety-Related Features
4. Safety-Related Features
This session describes the safety switches and module protection sen-
sors.
4.1 Safety Switches and Sensors
The safety switches and sensors work to stop the dangerous moving
mechanisms of the machine whenever an error is detected in the ma-
chine.
••
••
• The safety switches and sensors are set active on the machine side
(hardware), not by any software.
4.1.1 [EMERGENCY STOP] Switches
The multi-layer tray feeder is not provided with any [EMERGENCY STOP]
switches.
The [EMERGENCY STOP] switches of the main machine are com-
monly used for this feeder.
Press one of the [EMERGENCY STOP] switches to immediately stop
the machine in an emergency.
The power is turned off and the machine stops immediately.
0311-003 23 AHI01EGP
Fig. X18
[EMERGENCY STOP] Switch
Fig. X19
[EMERGENCY STOP] Switch (1)
[EMERGENCY STOP] Switch (2)
[EMERGENCY STOP] Switch (4)
[EMERGENCY STOP] Switch (3)
Front Side of Machine
Rear Side of Machine