OM-1078-002 - 第3页
Before Use The specifications and appearance of this machine and the accessory parts are subject to change without prior no- tice. Consult our marketing department or sales agency for non- described details of the machin…
Before Use
We are grateful to you for purchasing our machine.
This manual describes how to handle the multi-layer tray
feeders safely.
Please read the instruction manual of TIM-X100 thoroughly
before actual operations of this machine.
The instruction manual is compiled especially for the op-
erations of the machine. The manual can also be used as
a textbook for in-company training.
Please read this manual carefully for correct operations
and pay special attention to safety precautions. Always
keep this manual at hand.
Fig. X1
This manual is made of recycled paper.
INSTRUCTION MANUAL
MULTI-LAYER TRAY FEEDER
FP-5030
OM-1078-002
0311-002 1 AHI01EGP
TIM-X100
Before Use
The specifications and appearance of this machine and the
accessory parts are subject to change without prior no-
tice.
Consult our marketing department or sales agency for non-
described details of the machine, the accessory parts, and
the instruction manual.
0109-001 2 AHI01EGP
About the Instruction Manual
• This instruction manual is classified into several volumes on subjec-
tive basis as follows.
Instruction Manual of Main Machine (TIM-X100)
This manual describes the check items, the safety pre-
cautions, the operations, the creation of component li-
brary data, the maintenance, and the troubleshooting
for the machine operators and the electrical circuit dia-
grams for service personnel.
Please read this manual thoroughly before operating
the multi-layer tray feeder.
Instruction Manual of Multi-Layer Tray Feeder
Section 1: Operation (Operator)
This manual describes the safety precautions and op-
erational procedures for the machine operators.
Coverage: This covers the outline, the specifications,
and the functions of the machine, the pre-
paratory and ending procedures of auto-
matic operation, and various menus related
to the program change and automatic op-
erations.
Section 2: Operation (Supervisor)
This describes the general items related to machine
operations for those who have learned how to operate
the machine.
Coverage: This covers the specifications and func-
tions of the machine and various menus
related to a program change operation.
Refer to the instruction manual of the main
machine for the other data.
Section 3: Programming and Machine Data
This describes various data for a programmer (s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the offset data.
Refer to the instruction manual of the main
machine for the other data.
0204-002 3
AHI01EGP
Fig. X2
Fig. X3
Volume 1: Operation (Operator)
Volume 2: Operation (Supervisor)
Volume 3: Programming and
Machine Data
Volume 5: Pneumatic and
Electrical Diagrams
COMPONENT LIBRARY
Volume 4: Maintenance and
Troubleshooting
INSTRUCTION MANUAL
MULTI-LAYER TRAY FEEDER
FP-5030
TIM-X100