OM-1078-002 - 第4页

About the Instruction Manual • This instruction manual is classified into several volumes on subjec- tive basis as follows. Instruction Manual of Main Machine (TIM-X100) This manual describes the check items, the safety …

Before Use

The specifications and appearance of this machine and the

accessory parts are subject to change without prior no-

tice.

Consult our marketing department or sales agency for non-

described details of the machine, the accessory parts, and

the instruction manual.

0109-001 2 AHI01EGP

About the Instruction Manual

• This instruction manual is classified into several volumes on subjec-

tive basis as follows.

Instruction Manual of Main Machine (TIM-X100)

This manual describes the check items, the safety pre-

cautions, the operations, the creation of component li-

brary data, the maintenance, and the troubleshooting

for the machine operators and the electrical circuit dia-

grams for service personnel.

Please read this manual thoroughly before operating

the multi-layer tray feeder.

Instruction Manual of Multi-Layer Tray Feeder

Section 1: Operation (Operator)

This manual describes the safety precautions and op-

erational procedures for the machine operators.

Coverage: This covers the outline, the specifications,

and the functions of the machine, the pre-

paratory and ending procedures of auto-

matic operation, and various menus related

to the program change and automatic op-

erations.

Section 2: Operation (Supervisor)

This describes the general items related to machine

operations for those who have learned how to operate

the machine.

Coverage: This covers the specifications and func-

tions of the machine and various menus

related to a program change operation.

Refer to the instruction manual of the main

machine for the other data.

Section 3: Programming and Machine Data

This describes various data for a programmer (s) who

creates pattern programs and a supervisor who must

understand the meanings of various data.

Coverage: This covers the offset data.

Refer to the instruction manual of the main

machine for the other data.

0204-002 3

AHI01EGP

Fig. X2

Fig. X3

Volume 1: Operation (Operator)

Volume 2: Operation (Supervisor)

Volume 3: Programming and

Machine Data

Volume 5: Pneumatic and

Electrical Diagrams

COMPONENT LIBRARY

Volume 4: Maintenance and

Troubleshooting

INSTRUCTION MANUAL

MULTI-LAYER TRAY FEEDER

FP-5030

TIM-X100

About the Instruction Manual

Section 4: Maintenance and Troubleshooting

This describes periodic maintenance operations,

troubleshooting, etc., for those who use this machine.

Coverage: This covers the periodic maintenance, the

list of consumables and servicing parts,

and the troubleshooting on simple errors.

Section 5: Pneumatic and Electrical Diagrams

This provides various kinds of material such as pneu-

matic and electrical circuit diagrams for those who are

in charge of machine servicing operations.

Coverage: Pneumatic Diagram, Parts Location, Elec-

trical Circuit Diagrams, etc.

• This manual may not be copied, in whole or part, with-

out written consent of the publisher.

• This manual should be regarded as part of the ma-

chine and the contents comply with all the specifica-

tions regarding the purchased machine. Please keep

this manual within reach to serve as a handy tool in

completely understanding the workings of this ma-

chine.

• The contents of this manual are subject to change

without prior notice.

0109-001 4

AHI01EOPP