OM-1078-002 - 第50页
3. Outline of Automatic Operation 031 1-003 1-14 AHI01EGP 3. Outline of Automatic Operation 3.1 Normal Automatic Operation Flow of Automatic Operation Program Change Operation Refer to "Section 2 Operation (Supervis…
2. Basic knowledge of Operation
0311-002 1-13 AHI01EGP
2. Basic knowledge of Operation
2.1 Basic Operations
Refer to "1.2 Touch Screens" in "Section 2" (the instruction manual (Vol.
1) of the main machine) for details.
This tray feeder is not provided with any touch screen.
The touch screen of the main machine is commonly used.
2.2 Starting or Exiting from the Application
2.2.1 Getting Started
Refer to "2. Starting or Exiting from the Application" in "Section 2" (the
instruction manual (Vol. 1) of the main machine) for details.
This tray feeder is not provided with any [POWER ON] button.
The [POWER ON] button of the main machine is commonly
used.
Note
Note
3. Outline of Automatic Operation
0311-003 1-14 AHI01EGP
3. Outline of Automatic Operation
3.1 Normal Automatic Operation
Flow of Automatic Operation
Program Change Operation
Refer to "Section 2 Operation (Supervisor)" for details.
Inspections Work before Operation
Refer to the following items in "Section 3" (the instruc-
tion manual (Vol. 1) of the main machine) for details.
1.1.1 Confirmation of Power Supply and Air Pressure
1.1.2 Confirmation of Safety Doors and Feeder Base
Pullout Prevention Bars
Preparation before Operation
Refer to the following items for details.
3.3.1 Power ON Operation
3.3.2 "AUTO OPERATION" Windows and Zeroing
of Each Device
3.3.3 Preparation for Pallets
3.3.7 Preparation for P.C.B.’s
Start of Automatic Operation
Refer to the following item in "Section 3" (the instruc-
tion manual (Vol. 1) of the main machine) for details.
1.3 Start of Automatic Operation
Stop and Re-Start Operation of Automatic Operation
Refer to the following items for details.
3.5.1 Replenishment of Components
3.5.2 Replenishment of P.C.B.’s
3.5.3 Temporary Stop (Pause) with [STOP] Button
3.5.4 Stop Operation by Selection of "Auto Stop Mode"
Interruption of Automatic Operation
Refer to the following item in "Section 3" (the instruc-
tion manual (Vol. 1) of the main machine) for details.
1.5.1 Interruption with [CANCEL] Button
1.5.2 Interruption with [EMERGENCY STOP] Switch
End of Automatic Operation
Refer to the following items in "Section 3" (the instruc-
tion manual (Vol. 1) of the main machine) for details.
1.6.1 Stop of Automatic Operation
1.7.1 Procedure for Shut-Down Operation
1.7.2 Locking the Power Breaker with the Padlock
Fig. A15
Fig. A16
3.2 Inspections before Automatic Operation
3.2.1 Confirmation of Power Supply and Air Pressure
Refer to "1.1.1 Confirmation of Power Supply and Air Pressure" in "Sec-
tion 3" (the instruction manual (Vol. 1) of the main machine) for details.
The power and air pressure are supplied to this feeder from the
main machine.
3.3 Preparation before Operation
3.3.1 Power ON Operation
Refer to "1.1.1 Confirmation of Power Supply and Air Pressure" in "Sec-
tion 3" (the instruction manual (Vol. 1) of the main machine) for details.
This feeder is not provided with any power breaker and [POWER
ON] button.The power breaker and the [POWER ON] button of
the main machine is commonly used.
3.3.2 "AUTO OPERATION" Windows and Zeroing of Each Device
Refer to "1.2.2 "AUTO OPERATION" Windows and Zeroing of Each
Device" in "Section 3" (the instruction manual (Vol. 1) of the main ma-
chine) for details.
3.2 Inspections before Automatic Operation
0311-002 1-15 AHI01EGP
Note
Note