OM-1078-002 - 第54页

How to handle the tray magnets Do not bring the tray magnet close to any implanted pacemaker . Otherwise, the pacemaker may be influ- enced by electromagnetic impulses of the magnet, causing the wearer to faint, etc. Do …

0311-003 1-17 AHI01EGP

• Do not apply any force to a pallet as shown in the figure below. Other-

wise, the pallet may be deformed.

Fig. A19

• Do not stack the pallets on top of one another as shown in the figure

below when they are stored. Otherwise, the pallet may be deformed.

Fig. A20

How to check if a pallet is deformed or not

(1) Put a pallet on a flat surface.

(2) Put a scale on the pallet and check if the whole upper surface of the

pallet is flat (no warpage) or not.

Fig. A21 Normal Pallet

Fig. A21-1 Deformed Pallet

Force

Scale

Pallet

3.3 Preparation before Operation

Suspended

Scale

Pallet

How to handle the tray magnets

Do not bring the tray magnet close to any implanted

pacemaker. Otherwise, the pacemaker may be influ-

enced by electromagnetic impulses of the magnet,

causing the wearer to faint, etc.

Do not bring a magnetic card or a watch close the tray

magnets. Otherwise, the data of the magnetic card

might be cleared or a watch, etc., may be damaged

due to the strong magnetism.

• Tolerable Mass and Size of Tray Fixation with Tray Magnets

Mass: Approx. 500 g

Dimensions: Max. 360 × 230 mm

Fig. A21-2

Consult our marketing department or sales agency when a larger

tray than the above-described one is used.

0311-002 1-17-1

AHI01EGP

3.3 Preparation before Operation

Tray

Tray Magnets

Pallet

360

230

Note

CAUTION

WARNING

0311-003 1-18 AHI01EGP

3.3.4 Procedure of Tray Attachment to Pallet

(1) Put a flat and rigid object (thickness: 2 mm or more) under the pallet

as shown in the figure below.

Do not set the pallet upside down (wrong side facing up or down).

Fig. A21-3

(2) Place a tray on the right rear area of the pallet.

Fig. A22

3.3 Preparation before Operation

Flat and Rigid Object

(Thickness: 2 mm or more)

Pallet

Direction of Insertion into Rack

Reference Plane

Tray

Pallet

Note