OM-1078-002 - 第79页

4.2.2 "T est Run" T ab The corresponding tab sheet enables the operator to specify a test pat- tern. • • • • • Sheet Layout When the "T est Run" tab is pressed in the "OPN. MODE" window (sub…

••

• Sheet Composition

*1 "Over Tact-Time Reduction" Group Box

[Tray Elevator] Button

When pressed, this button opens the "Tray Elevator" edit window,

enabling the operator to specify the speed reduction rate of the tray

elevator.

[Tray Traverse] Button

When pressed, this button opens the "Tray Traverse" edit window,

enabling the operator to specify the speed reduction rate of the tray

traverse.

Fig. B2 "Tray Elevator" Edit Window

0204-002 2-10

AHI01EGP

4.2 "OPN. MODE" Window (Submenu)

4.2.2 "Test Run" Tab

The corresponding tab sheet enables the operator to specify a test pat-

tern.

••

• Sheet Layout

When the "Test Run" tab is pressed in the "OPN. MODE" window

(submenu), the following tab sheet appears inside the window.

Fig. B3 "Test Run" Tab Sheet

••

• Sheet Composition

*1 "Test Run" Group Box

Select one of the following buttons as a test mode.

The following buttons are provided in this group box.

[Shtg. Of Comp. Dsbl.] Button

[Tray Matrix Update Dsbl.] Button

[Tray Comp Feed Dsbl.] Button

[Tray Pll Det Dsbl.] Button

When one of the above buttons is pressed, a check mark appears

in the check box of the button and the background color of the but-

ton turns creamy white, indicating that the function is selected.

To cancel the selection, press the button again. The check mark in

the check box disappears and the background color of the button

turns gray (original color).

Several functions can be selected.

0311-003 2-11

AHI01EGP

4.2 "OPN. MODE" Window (Submenu)

Note

0311-003 2-12 AHI01EGP

4.3 "Feeder Reload" Window (Submenu)

4.3.1 "Pickup Tray Matrix" Tab

The corresponding tab sheet enables the operator to verify the compo-

nent information for each individual steps and blocks.

• Sheet Layout

When the "Pickup Tray Matrix" tab is pressed in the "Feeder Reload"

window (submenu), the following tab sheet appears.

Fig. B4 "Pickup Tray Matrix" Tab Sheet

• Sheet Composition

*1 Step No.

Displayed are the step Nos.

When the "Step No." button of the step to be edited is pressed, the

information on the components in the selected step is displayed.

*2 Block No.

Displayed are the block Nos.

4.3 "Feeder Reload" Window (Submenu)