OM-1078-002 - 第88页
*2 "All" Group Box It is indicated whether or not all devices are zeroed. "—" : All devices are not zeroed. "Origin" : All devices are zeroed. *3 [Select All] Button When this button is pres…
5.1 "MNL. OPN." Window (Submenu)
5.1.1 "Zeroing Opn." Tab
The corresponding tab sheet enables the operator to zero each device
(axis).
• Sheet Layout
When the "Zeroing Opn." tab is pressed in the "MNL OPN." window
(submenu), the following tab sheet appears.
Fig. B8-1 "Zeroing Open." Tab Sheet (Provided with Multi-Layer Tray Feeder 2)
• Sheet Composition
*1 "Select Unit" Group Box
The following buttons are provided in this group box.
[Tray 2 Axis] Button
When a button is pressed, the background color turns yellow, indi-
cating that the device (axis) is selected.
Pressing the button again changes the background color to the origi-
nal one, indicating that the selection is canceled.
Each button has a box on the right side and the status of the corre-
sponding device is indicated in the box.
Two or more devices can be selected.
*2
*3
*4
*5
*1
0311-003 2-16 AHI01EGP
Note
5.1 "MNL. OPN." Window (Submenu)
*2 "All" Group Box
It is indicated whether or not all devices are zeroed.
"—" : All devices are not zeroed.
"Origin" : All devices are zeroed.
*3 [Select All] Button
When this button is pressed, all devices (possible to be returned to
their origins) are selected and the corresponding buttons turn yel-
low.
The [Select All] button cannot be used to select the [Sup-
port Pin Axis] and [Conv. Wid. Adj. Axis] buttons.
*4 [Cancel All] Button
When this button is pressed, the selection of all devices is can-
celed.
*5 "Control Switch" Group Box
When the [ENABLE] button on the operation panel is pressed in two
seconds after a device(s) is selected and the [ON] button (entitled
"MOVE") is pressed, the device is zeroed.
(a) After the zeroing operation is completed, "Origin" ap-
pears in the box on the right side of the corresponding
button.
(b) When the current position is being managed or indefi-
nite, "—" appears in the box.
0311-002 2-16-1
AHI01EGP
5.1 "MNL. OPN." Window (Submenu)
Note
Note
0311-002 2-16-2 AHI01EGP
5.1.2 "Manual Axis Opn." Tab
(1) "Tray" Tab
The corresponding tab sheet enables the operator to perform an
manual axis operation on the selected device.
• Sheet Layout
When the "Tray" tab is pressed in the "Manual Axis Opn." tab sheet,
the following tab sheet appears.
Fig. B8-2
• Sheet Composition
*1 "Tray #2" Group Box
The following buttons are provided in this group box.
[Traverse #2 Axis] Button
[Elevator #2 Axis] Button
When a button is pressed, the background color turns yellow, indi-
cating that the device (axis) is selected.
Pressing the button again changes the background color to the origi-
nal one, indicating that the selection is canceled.
Each button has a box on the right side and the current location of
the device appears in the box.
5.1 "MNL. OPN." Window (Submenu)
*1