User Manual SIPLACE Head Care Station - - 第15页
2 Safety 2.2 Warning labels User Manual SIPLACE Head Care Station 10/2017 15 2.2 Warning labels The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to water and weathering. Th…
2 Safety
2.1 Conventions for the use of safety instructions
14 User Manual SIPLACE Head Care Station 10/2017
2.1.1 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
installation and operation of the SIPLACE Head Care Station and are suitably qualified, for ex-
ample:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
2.1.2 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.2.1 General
► The operational safety of the SIPLACE Head Care Station can only be guaranteed if the sys-
tem is used as prescribed and in accordance with the instructions in the user / software manu-
als.
► Always follow any safety regulations specific to your country.
► Make sure that the warning labels are always clearly identifiable and always easily readable.
► Replace any damaged warning or notice labels. Replace any labels that are missing.
► If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in an ASM Assembly Systems GmbH&Co.KG service en-
gineer. ASM Assembly Systems GmbH&Co.KG will not accept liability for any damage or
consequential damage that is the result of unauthorized/incorrect work.
► Always switch off the main switch before performing work on the z-axis.
► If particularly hazardous situations are identified while the HCS is in use, the machine owner
must immediately notify the manufacturer in writing so that appropriate action can be taken to
reduce the potential danger.
WARNING
Severe injuries and damage to equipment in the case of incorrect usage!
In spite of all the safety precautions taken by the manufacturer, failure to use the system as
prescribed can result in severe injury and considerable damage to the equipment. For the
HCS to be safe, it must be used correctly by qualified personnel and all warnings must be
observed.
► Specially trained personnel is a prerequisite for the installation and operation of the
HCS.
2.1.2.2 Safety of operators and other persons
► Machine operators must only carry out work for which they have been adequately trained and
with which they are totally familiar.
WARNING
The HCS is electrically driven. Certain parts carry dangerous voltage levels.
There is a risk of death, severe injury and/or considerable damage to equipment if these in-
structions are not followed.
► Switch off the main switch and disconnect the HCS head unit from the power supply
before installing or uninstalling a head, or before performing work on the z-axis.
2.1.2.3 Safety of plant and equipment
► Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
► Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices.
2 Safety
2.2 Warning labels
User Manual SIPLACE Head Care Station 10/2017 15
2.2 Warning labels
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to
water and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.6.
WARNING
Damaged or illegible warning labels
Make sure that the warning labels are always clearly identifiable and always easily read-
able.
► Do not use abrasive cleaners or solvents for cleaning warning labels.
► Replace any damaged or illegible warning labels.
► Replace any labels that are missing.
2.2.1 Warning labels on the HCS
Fig.2: HCS warning labels
1 ESD label [03068815-xx] 2 W 210 [03009350-xx]
3 W 206 [03009345-xx] 4 W 201 [03009338-xx]
5 W 215 [03006471-xx]
2 Safety
2.2 Warning labels
16 User Manual SIPLACE Head Care Station 10/2017
2.2.1.1 ESD connection button label
Fig.3: ESD
ESD connection button label
Label for ESD ground connection point for ESD wrist strap.
Item no.: 03068815-xx
2.2.1.2 Warning label W 210
Fig.4: W 210
Warning label on the EMERGENCY OFF button
Item no.: 03009350-xx
Quantity per machine: 1
2.2.1.3 Warning Label W 206 on the HCS back side
Fig.5: W 206
DANGEROUS VOLTAGES!
The labeled parts are still live when the main power switch is off. Disconnect the
HCS from the mains before servicing it.
Item no.: 03009345-xx
Quantity per machine: 1
2.2.1.4 Warning label W 201
Fig.6: W 201
Safe operation of the Head Care Station
Safe operation of the Head Care Station depends absolutely on the operator be-
ing familiar with the User Manual and safety instructions and putting them into
effect.
Item no.: 03009338-xx
Quantity per machine: 1
2.2.1.5 Warning Label W 215
Fig.7: W 215
RISK OF DAMAGE to electronically sensitive assemblies
Reaching into the machine without wearing an ESD wristband or without con-
nection to the ESD connection button can damage the electrical assemblies or
SMD components.
Item no.: 03006471-xx