3OM-1208-011_w.pdf - 第260页
6-27 AIVEDT -ID 2.1.10 NL Origin Offset When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the "NL Origin Ofst" tab is selected, the following tab sheet appears. Fig. …
6-26
AIVEDT-ID
0606-009
Head 1, Head 2, Head 3, and Head 4
Z [deg]
The set parameters are used to adjust the angular deviations of the line
connecting Nozzles 1 and 7 at the head rotational Z-phase position
based on the machine coordinate reference.
When the line is tilted clockwise in the machine reference X/Y
coordinate system, a plus sign must be affixed to the offset data.
Xm (+)
Ym (+)
Xm-Ym : Machine Reference
Coordinate System
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
DD Motor Z-Phase
Stop Position
DD Motor Z-Phase
Stop Position
DD (+)
DD (+)
Head Rotational Angle Offset
Head Rotational Angle Offset
Pm. Machine Reference
Coordinate Origin
Fig. 3F25
2.1 Device Offset Data
6-27
AIVEDT-ID
2.1.10 NL Origin Offset
When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the
"NL Origin Ofst" tab is selected, the following tab sheet appears.
Fig. 3F26 "NL Origin Ofst" Tab Sheet
Head 1, Head 2, Head 3, and Head 4
L (Height) [mm]
The
set parameters are used to correct the deviations between the nozzle
U/D mechanism and the nozzle roller caused while the NL axis is
rotating.
0606-009
2.1 Device Offset Data
6-28
AIVEDT-ID
2.1.11 Nozzle Selection Axis Offset
When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the
"Noz. Sel Axis" tab is selected, the following tab sheet appears.
Fig. 3F27 "Noz. Sel Axis" Tab Sheet
Head 1, Head 2, Head 3, and Head 4
Z (Angle) [deg]
The se
t parameters are used to adjust the angular deviations between the
head rotational and nozzle selection axes.
0606-009
2.1 Device Offset Data