00193730-04 - 第30页
Retrofit instructions Splice Detection Basic Package + Tab le Controller SIPLACE HF-series 08/2005 Edition 30 2.8 Adapter (third t ape reel) 2.8.1 Content of retrofit kit (Part no.:001 19642-01) Qty Designation Part no.:…
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
29
: Connect sockets #2 and #4 using the cable provided (03006409-01) (Fig. above).
: Now refit the complete device to the bed of the changeover table.
2
2
The CAT5 data cable, part no.: 03001303-01 (see picture), is fixed inside the machine using cable
ties. 2
: Plug the existing CAT5 data cable into socket #5. Then fix it to the bottom of the case using
cable clips.
: Push the component feeder table back into the machine.
2
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
30
2.8 Adapter (third tape reel)
2.8.1 Content of retrofit kit (Part no.:00119642-01)
Qty Designation Part no.:
- 1 Left bracket, complete 03012611-01
- 1 Right bracket, complete 03012647-01
- Assembly materials
2.8.2 Installation
: Open the protective cover.
: Dock the component trolley out of the placement machine.
: Take the tape reels from the tape reel container.
: Take the outer tape separators (left and right) out of the component trolley.
2
2
2
2
2
2
2
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
31
: Unscrew the four screws used to fix the tape reel container and remove the container.
2
2
: Position the brackets at right-angles to the partition and fix them loosely with two screws.
2
2
: Place the adapter (third tape reel) on the bracket and check the position with a spirit level.
Tighten the screws in the brackets if the adapter is straight.
2
2 screws
Hole in the bracket