00193730-04 - 第37页
Retrofit instructions Splice Detection Basic Packa ge + Table Controller SIPLACE HF-series 08/2005 Edition 37 2 2 2 2 2 2 2 2 2 RS 222 to the st ation computer T1 T3 T4 T2 Power supply Ground
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
36
: To pull the four cables to the component trolley through the placement machine, you can first
pull a relatively rigid wire through the machine frame, and tie the cables to it.
2
2
: Then pull the cable through the machine frame using the wire.
2
: Connect the cable (part no.: 03001300-01) to the cable plugged into the component trolley
using the coupling.
2
2
2
2
2
2
2
2
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
37
2
2
2
2
2
2
2
2
2
RS 222
to the station
computer
T1
T3
T4
T2 Power
supply
Ground
Retrofit instructions Splice Detection Basic Package + Table Controller SIPLACE HF-series
08/2005 Edition
38
2.10 Converting the control unit
: Switch the placement system off at the main switch.
: Push the RS232C adapter into the control unit (see picture below).
2
2
2
2
2
2
2
2
2
2
2
2