TR7500E_Manual_en_v28 - 第116页
C h a p t e r 2 M a nu a l B a r i n t r o d u ce T R 7500 U S E R M A N U AL 1 09 7 . 9 . I n l i n e C o m p o n e n t A n a l y s i s l Y ou ca n c o ll e c t i n s p e c ti o n r e s u l t a n d r e v i e w r e s u l…
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
108
l Set Fiducial 1 Search Range – Adjust the green box to meet the search range that
you want to set then press [OK].
l Sensitive – Set the sensitivity of the fiducial mark. For example, the score is 40;
when an object in search range and the similarity is higher than 40, that object
will be regarded as the fiducial mark.
7.6. Reset X Y Table
l Press to move camera to original position.
7.7. Unload Panel
l Press the item to send the board to the board-out side.
7.8. Panel Standby Test
l Select to test the PCB without board out. You can select the test times.
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
109
7.9. Inline Component Analysis
l You can collect inspection result and review result on machine.
7.9.1. Enable Cpk Data Collection
l When you select the item the following window will present. You can select the
collection rule here.
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
110
n X-Shift、Y-shift、Theta– Presents the horizontal shift and vertical shift and
the rotated angle separately.
n High, Low – The upper and lower limit for the testing result. When the
result is laid in this range, it can be included in calculating.
n USL–The upper spec limit for calculating Cpk index.
n LSL–The lower spec limit for calculating Cpk index.
n CpkSpec–The tolerance for Cpk. It is normal when Cpk is greater than this
value; it’s abnormal when Cpk is smaller than this value.
n Never–Not to output automatically.
n By Inspection Time–Outputs data according to the assigned time
interval.(unit: hours)
n By Inspection Times–Outputs data according to the assigned number of
inspected counts.
7.9.2. Cpk Data Report
l You can review the data you collect before.