00195193-02 SG D4 FSE en (1) - 第18页
Operational Safety Warning labels Warning labels W201, W203, W204 and W210 on the machine S tudent Guide SIPLACE D4 (FSE) Operational Safety EN 09/2006 18 2.2 W arning labels 2.2.1 W arning labels W201, W203, W2 04 and W…
Operational Safety
Safety of operators and other persons Safety Instructions
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
17
2 Operational Safety
2.1 Safety Instructions
Any staff working on the machine must be familiar with the safety instructions in this user manual and
observe these at all times.
The following safety instructions are an excerpt from Chapter 1 "Operational Safety" of the SIPLACE
user manual.
2.1.1 Safety of operators and other persons
Machine operators must only carry out work for which they have been adequately trained and with which
they are totally familiar.
2.1.2 Safety of plant and equipment
Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
The stations must always be set up, retooled and maintained by appropriately trained personnel.
Only use original spare arts and authorized accessories from Siemens AG. The use of other parts
will affect safety and will invalidate the liability for any consequential damage.
Do not make modifications to the safety equipment. Never bridge protective switches or remove
protective devices.
WARNING:
The system is electrically driven. When electrical devices are in use, certain
parts carry dangerous voltage levels.
X Switch off at the main switch and disconnect the placement system from the
power supply before carrying out any work on live components.
X Lock the machine.
X There is a risk of death, severe injury and/or considerable damage to
equipment if these instructions are not followed.
Operational Safety
Warning labels Warning labels W201, W203, W204 and W210 on the machine
Student Guide SIPLACE D4 (FSE)
Operational Safety EN 09/2006
18
2.2 Warning labels
2.2.1 Warning labels W201, W203, W204 and W210 on the machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to water
and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
2.2 - 1: Warning labels W201, W203, W204 and W210 on the placement system - part 1
W201, article no. 03009338-01
W203, article no. 03009342-01
W204, article no. 03009343-01
W210, article no. 03009350-01
Operational Safety
Warning labels W201, W203, W204 and W210 on the machine Warning labels
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
19
2.2 - 2: Warning labels W203, W204 and W210 on the placement system - part 2
W203, article no. 03009342-01
W204, article no. 03009343-01
W210, article no. 03009350-01
2.2.1.1 Warning label W201
WARNING:
Do not use abrasive cleaners or solvents for cleaning warning labels.
Replace any damaged or illegible warning labels.
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on the operator being
familiar with the user manual and safety instructions and putting them
into effect.
Article no. 03009338-01 (quantity per machine: 1)