00195193-02 SG D4 FSE en (1) - 第334页

SIPLACE Measurement tools (D4) Track signal tester [00343785-01] Package S tudent Guide SIPLACE D4 (FSE) SIPLACE Measurement tools (D4) EN 09/2006 314 13.3 T rack signal tester [00343785-01] 13.4 Belt tension tester [003…

100%1 / 340
SIPLACE Measurement tools (D4)
Package Adapter Card for A364 [03051220-01]
Student Guide SIPLACE D4 (FSE)
EN 09/2006 SIPLACE Measurement tools (D4)
313
13.2 Adapter Card for A364 [03051220-01]
The A364 axis board is equipped with two
processors (module 1 and module 2) i.e. one
processor controls two axes.
Legend:
Module 1: axis 1/2
Module 2: axis 3/4
1. Bootstrap mode: m1=module1/m2=module2
2. Diagnosis – connector X6
3. Connection X3 SIPLACE axis tester
4. Connection X2 axis test box
5. Connection X1 to A364
6. Switch:
– S3: for 7 segment display between
modules 1 and 2
– S2: selection module 2 axis 3 and 4
– S1: selection module 1 axis 1 and 2
7. Diagnosis 7-segment display
8. CAN Bus connector (Sub-D)
9. BNC socket:
– Vnom. 1/2 – 3/4 according to switch
position S1,S2
– Torque-forming current I-
target
1/2 – 3/4
according to switch position S1, S2
– END 1 - 4 end position signal of axes 1 - 4
– Upstream end position signal: Trigger m1
for axes 1/2, trigger m2 for axes 3/4,
according to switch position S1, S2
10. Reset both processors
SIPLACE Measurement tools (D4)
Track signal tester [00343785-01] Package
Student Guide SIPLACE D4 (FSE)
SIPLACE Measurement tools (D4) EN 09/2006
314
13.3 Track signal tester [00343785-01]
13.4 Belt tension tester [00326015-01]
Track signal tester
Application
The track signal tester is used to check the
track signals of the incremental encoder of the
gantry axes (from HS50 onward).
Belt tension tester
Application:
Is used for the measurement of the belt
tension (toothed belts) on the machine.
SIPLACE Measurement tools (D4)
Package SIPLACE compressed air tester [00311487-01]
Student Guide SIPLACE D4 (FSE)
EN 09/2006 SIPLACE Measurement tools (D4)
315
13.5 SIPLACE compressed air tester [00311487-01]
SIPLACE compressed air tester GDH14
Application:
The compressed air tester is used for the
adjustment of the air kiss on placement heads
C&P6 and C&P12 on SIPLACE machines.