00195193-02 SG D4 FSE en (1) - 第44页

Overview General Overview of Assemblies Axis Unit and Computer Unit S tudent Guide SIPLACE D4 (FSE) Overview EN 09/2006 44 Sector 4:  CAN I/O module 2 with CAN interface 500 KBit/s for S tables  Assembly A3 CAN termina…

100%1 / 340
Overview
Sectors General Overview of Assemblies
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Overview
43
3.2.1 Sectors
Sector 1:
Transport control CC 301
CAN interface CAN Bus baudrate 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 1
Vision DC/DC converter illumination digital camera gantry 1 - 4 (03002280-02)
Terminal X100 power supply
Pneumatic switch for CO table 1
Sector 2:
CAN I/O module 2 with CAN interface 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 2
2x fuse 24 V
Relay K1 station – compressed air shutoff
Terminal X200 power supply
Pneumatic switch for CO table 2
Sector 3:
CAN interface CAN Bus baudrate 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 3
Terminal X300 power supply
Pneumatic switch for CO table 1
Legend:
1. Sector 1
2. Sector 2
3. Sector 3
4. Sector 4
5. Transport direction
Overview
General Overview of Assemblies Axis Unit and Computer Unit
Student Guide SIPLACE D4 (FSE)
Overview EN 09/2006
44
Sector 4:
CAN I/O module 2 with CAN interface 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 4
2x fuse 24 V
Terminal X400 power supply
Pneumatic switch for CO table 1
3.2.2 Axis Unit and Computer Unit
Axis unit 1 – installation set on the PCB input side:
Servo board X, Y, star, Z, DP for PA1
3x Axis board A364
2x power supply 5 V/15 A, +/-15 V
Computer unit
Box PC with CD-ROM drive (SR, SIPLACE Vision)
Micro Box PC (MC)
Multiplexer
USB hub
Axis unit 2 – installation set on the PCB output side:
Servo board X, Y, star, Z, DP for PA2
3x Axis board A364
2x power supply 5 V/15 A, +/-15 V
Ballast circuit
1. Sector 1
2. Sector 2
3. Sector 3
4. Sector 4
5. Transport direction
6. Axis unit 1
7. Computer unit
8. Axis unit 2
Overview
Axis Unit and Computer Unit General Overview of Assemblies
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Overview
45
3.2.2.1 Computer unit
1. Station computer Siemens Simatic Box PC (SR-SW, SIPLACE Vision SW)
2x Hotlink boards for SIPLACE Vision, connected to the digital cameras
4x USB port
2x LAN Ethernet (LAN 1 connected to MC, LAN 2 hub or SIPLACE Pro)
1x VGA connection, connected to Multiplexer (monitor)
Voltage supply 24 V DC
2. Machine controller Siemens Simatic Micro Box PC (RMOS SW)
2x LAN Ethernet (LAN 1 connected to SC, LAN 2 - not in use)
4x USB port
1x VGA connection, connected to Multiplexer (monitor)
COM assembly CAN 1 for PA1 CAN 2 for PA2
Voltage supply 24 V DC
3. Multiplexer (switch over between SR and MC)
4. USB hub 2.0 – 7 port
Voltage supply connection
USB input from station computer
7x USB outputs (2x keyboard, 2x touchscreen, 3x free)
5. External CD-ROM drive with USB interface (also for MC)
Legend:
1. Station computer Siemens Simatic Box PC
2. Machine controller Siemens Simatic Micro Box
PC
3. Multiplexer
4. USB hub