Techcon-Catalog102015-EN-Web - 第16页

TS 500R Dig ita l Cont rol ler 14 TS 50 0R Mu lti -P urp os e Di gi tal Co ntr ol ler Cos t-Ef fecti ve and Pr oduct ivit y-Foc used Mul ti-Pu rpos e Digit al Cont roll er The TS500 R is the firs t of its typ e in the in…

TS9200D Series Jet Tech

The TS9200D Jet Tech is a non-contact dispense valve capable of

jetting fluid viscosities to 400,000 Cps. Jet Tech offers a fast jetting

action producing hundreds of precise droplets in less than one second.

The main feature of the valve is a single, easily replaceable diaphragm

to eliminate dynamic fluid seals found in other jet valves. No longer is it

necessary to disassemble, clean and replace worn seals, which

translates into saving time and money. The diaphragm also allows fast

cycle rates because of its very small mass. There is no large sliding

valve system that slows down the process. With this novel diaphragm

design, the energy needed to eject a drop can be adjusted providing a

wider process window.

It’s Fast – 300 drops/sec continuous duty. 50% increase in throughput

over conventional Jet valves.

It’s Simple to Clean – only 2 parts contact the fluid. Conventional Jet

valves can have as many as 8 parts requiring cleaning. With only two

parts to clean, cleaning the TS9200D takes only minutes and there is no

need to remove the Jet valve from the robot. A diaphragm and nozzle

plate can be installed immediately without the need to carefully calibrate

the Jet valve saving valuable production time and no special off-line

cleaner is required.

It’s Capable – the TS9200D generates a very high drop velocity allowing

a wide range of fluids and applications. In addition, the drop velocity can

be easily changed to help fine tune the process and achieve a high

process capability and wide process window.

It’s Cool – the advanced electronic drive provides power when required

and reduces power when idle. The internal air flow cools the Jet body

so it runs cool even during high-speed, continuous operation. The

integral nozzle heater heats only the fluid in the nozzle plate and is

thermally isolated from the jet body.

It’s Easy to Integrate – In combination with the standalone TS920

controller, a single trigger line is all that is needed to be dispensing

complex dispensing programs.

Typical Applications:

The TS9000D Jet Tech can be used in wide range of

applications. Some examples of processes and applications are:

• Jetting silver epoxies for die bonding processes

• Jetting silicone phosphor in the LED assembly process

• Jetting under-fill in micro-electronic package applications on

PCBA

• Jetting micro dots of UV adhesive in medical device

applications

Jet Valve System Specifications:

Size Width: 50.8mm (2.00'')

Size Depth: 93.8mm (3.69'')

Size Height: 88.9mm (3.50'')

Weight : 348g (0.77lb)

Speed: Up to 300Hz Continuous Duty

Syringe Capacity: 5, 10, 30 and 55cc

Minimum Shot Size: 10nl

Viscosity Range: 1 to 400K Cps.

Fluid Pressure: 40 psi (2.76bar)

Jet Pressure: 35psi to 70psi (2.41 to 4.8bar)

Operating Temperature: 10 to 50°C

Key Features:

• Non contact Jetting technology

• Accurate and precise dispensing

• High speed, up 300 drops/sec

• Repeatable drop size as small as 10 nl

• Jet fluid up to 400K Cps.

• No fluid seals to clean or replace

• Integral heater with minimal fluid heated

• Quick and simple setup

• Low total cost of ownership

TS500R Digital Controller

TS500R Multi-Purpose Digital Controller

Cost-Effective and Productivity-Focused Multi-Purpose Digital Controller

The TS500R is the first of its type in the industry and is capable of controlling all of Techcon Systems valve series including:

Pneumatic Valves, Spray Valves and Rotary Auger Valves.

With a universal power supply, it is a fully ‘plug and play’ system and can be used immediately, anywhere in the world, with its

accompanying tools and accessories. This system uses a highly responsive air pressure management system, coupled with a digital

timing circuit and display, to provide consistent, repeatable control of all types of valves.

Key Features:

• Universal power supply with snap-on plug

• Clear 20 x 4 segments LCD display

• Classic “Rack Mount” rectangular design

• Digital timing from 0.008-60.000 seconds

• Digital pressure display in “psi” and “bar”

• +/- 0.001% Repeat timing tolerances

• 10 Programmable memories

• Adjustable low pressure alarm setting

• Controls all Pneumatic, Spray and Rotary

Auger Valves (inc. Encoder Motor Valves)

Specifications:

Cabinet Dimensions: 10.0"W x 7.5"D x 4.0"H (254mm x 191mm x 102mm)

Weight: 5.8 lb. (2.6 kg)

Cycle Rate: 900 cycle/minute

Timing Range: 0.008-60.000 seconds

Timing Repeat Tolerances: +/- 0.001%

AC Adaptor Input Voltage: 100-240 V

AC Input Frequency: 50-60 Hz

Cycle Mode: Timed Mode, Teach Mode, Purge Mode

Meets or exceeds: CE, TUV-GS and NRTL

Warranty: 2 years

TS5000 Rotary Microvalve

TS5000DMP - performing underfill.

Optional encoder motors are available for

closed loop feed back requirement.

TS5000DMP Right hand opening.

Left and front door opening

also available.

TS5000 Disposable path available in

3 different pitches, and with 3 different

rotating Luer collars.

Disposable Path

Material

Rotating Luer

Collars

6 Pitch

DMP6-10 DMP6R-10

8 Pitch

DMP8-10 DMP8R-10

16 Pitch

DMP16-10 DMP16R-10

Sold in packs of 10.

TS5000DMP Rotary Microvalve

The Rotary Valves use a rotary feed screw (auger) to dispense fluid with

a positive displacement action, allowing for ultra-precise control of the

dispensing process. The unique design ensures that material is

constantly present at the feed screw inlet, while the controlled rotation of

the feed screw moves the material from the feed to the discharge point.

Discrete control of the forward and reverse rotations of the feed screw

controls the amounts of material discharged.

The unique DMP (Disposable Material Path) Valve (TS5000DMP) offers

a choice of 3 different feed screw sizes (6, 8 and 16-pitch), all made of

Delrin

. The DMP Valve has a hinged doorway that opens easily so the

disposable auger can be removed and replaced within seconds, while

the line is still in operation, significantly reducing downtime and waste.

The choice of left, right or center hinge openings makes the valve

suitable for mounting on most automated systems.

Typical Applications:

Solder paste, die attach, surface mount adhesive, chip encapsulation,

dam writing, two-part epoxy, UV adhesive.

Key Features:

• Precise and consistent shot sizes

• Motor reverse capability

• Field replaceable wetted parts

• Adjustable dispense rate

• Closed-loop motor control with encoder feedback (encoder version)

TS5000DMP

Length: 5.88" (149mm)

Width: 3.56" (90mm)

Weight: 0.77 lb. (350 g)

Wetted Parts: Delrin

, Viton

, Nylon

Max Fluid Pressure: 30 psi (2.1 bar)

Material Inlet: Female Luer Lock

Material Outlet: Male Luer Lock

Mounting: 1.0" (25.4mm) Wide Channel

Recommended

Viscosity Range: 30K - 1300K cps