00198761-01_SM_Head_Care_Station_II_EN - 第19页

3 Preparatory work... 3.1 Turn off and disconnect the HCS II Service Manual SIPLACE Head Care Station II 11/2019 19 3 Preparatory work... DANGER Observe safety instructions! ► Please observe the safety instructions in th…

2 Spare parts overview

2.4 List of all spare parts

18 Service Manual SIPLACE Head Care Station II 11/2019

3 Preparatory work...

3.1 Turn off and disconnect the HCS II

Service Manual SIPLACE Head Care Station II 11/2019 19

3 Preparatory work...

DANGER

Observe safety instructions!

► Please observe the safety instructions in this Service Manual and in the HCSII User

Manual for all work!

NOTICE

Observe the detailed circuit diagrams!

► For more detailed information refer to the circuit diagrams folder of the HCSII.

●

Detailed circuit diagrams folder for HCSII [DEEN:00198762‑xx]

3.1 Turn off and disconnect the HCS II

DANGER

Nonobservance may cause injury to personnel and damage to the HCS II!

► Before performing any service work on the HCS II, the following steps must be per-

form.

► End all verification operations at the HCS II.

► Close the SIPLACE Test Bench software.

► Shut down the Windows operating system correctly, otherwise problems may occur when

restarting or data may be lost.

► Switch off the HCS II at the main switch.

► Disconnect the HCS II from the main power supply.

► Disconnect the HCS II from the compressed air supply.

3.2 Equipment and tools

Equipment and tools needed to prepare the HCS II Head Unit for service work:

00353832‑xx Allen key set 2 mm, 2.5 mm

00376516-xx Socket wrench set 7 mm

00096290-xx Spanner wrench set 7 mm

00319064-xx Screwdriver Size 1

00318673-xx Side cutter electronic size 110

00096487-xx POINT PLIERS 140mm OVAL

00308458-xx Cable ties B=2.5mm, L=102mm Panduit

3 Preparatory work...

3.3 Access to the spare parts of the HCS II Head Unit

20 Service Manual SIPLACE Head Care Station II 11/2019

3.3 Access to the spare parts of the HCS II Head Unit

Fig.8: Remove covers

► Dismantle the placement head if avail-

able.

► Remove the cover(1).

► Disconnect the flat ribbon cables be-

hind the cover.

► Remove the five screws(2) fixing the

back cover(3) and put it down.

Fig.9: Remove covers

The back cover(1) is connected to the Head

Unit by a cable to the safety switch(2) and

an grounding cable(3).

► Unplug the cable to the safety

switch(2).

► You may want to remove the grounding

cable(3) for a better handling of the

Head Unit.