00198761-01_SM_Head_Care_Station_II_EN - 第58页

5 Service work – HCSII Control Box 5.5 Replacing the AC/DC converter (PS1) 58 Service Manual SIPLACE Head Care Station II 11/2019 Removal Fig.84: PS1 – cables ► Open any cable ties where necessary. You may want to mark…

100%1 / 68
5 Service work – HCSII Control Box
5.5 Replacing the AC/DC converter (PS1)
Service Manual SIPLACE Head Care Station II 11/2019 57
5.5 Replacing the AC/DC converter (PS1)
DANGER
Hazardous voltage
Death, serious injury or considerable damage may result if the power supply is handled
incorrectly.
Only SIPLACE service technicians or adequately trained personnel, e.g. certified electrical
specialist, are allowed to perform this task on the power supply.
Parts
Fig.82: AC/DC converter QS10.241 24VDC 10A 240W
(PS1)
●
AC/DC converter QS10.241 24VDC
10A 240W (PS1) [03087898‑xx]
What to consider before the removal
Fig.83: PS1 – cable lock – closed / half open / open
1 Closed
► Cable is fixed.
2 Half open
► Cable is still fixed.
► Do not try to pull out
the cable.
3 Open
► You can pull out the
cable now.
Preparatory work...
► Turn off and disconnect the HCS II. See 3.1 "Turn off and disconnect the HCS II" [}19].
► Perform the steps described in section 3.4 "Access to the spare parts of the HCS II Control
Box" [}21].
5 Service work – HCSII Control Box
5.5 Replacing the AC/DC converter (PS1)
58 Service Manual SIPLACE Head Care Station II 11/2019
Removal
Fig.84: PS1 – cables
► Open any cable ties where necessary.
You may want to mark the positions of
the relevant connections to make clear
assignment easier later on.
► Carefully unplug all cables on both
sides.
Fig.85: PS1 – open the lock
► Open the lock and carefully pull the
PS1 off the rail.
Installation
► Follow the removal instructions in reverse order for installation.
► Replace any cable ties which you have removed.
5 Service work – HCSII Control Box
5.6 Replacing the BoxPC ABP402-A (iBase)
Service Manual SIPLACE Head Care Station II 11/2019 59
5.6 Replacing the BoxPC ABP402-A (iBase)
Parts
Fig.86: BoxPC ABP402-A CPU1020E 2xPCI SSD (iBase)
●
BoxPC ABP402-A CPU1020E 2xPCI
SSD (iBase) [03120423‑xx]
This newer version replaces the following
older versions:
Control Computer BoxPC 627B complete
[03055280‑xx]
Control Computer BoxPC 627C
[03094731‑xx]
Preparatory work...
► Turn off and disconnect the HCS II. See 3.1 "Turn off and disconnect the HCS II" [}19].
► Perform the steps described in section 3.4 "Access to the spare parts of the HCS II Control
Box" [}21].
Removal
Fig.87: Removal 1
► Carefully unplug the power cable(1)
(screwed) on the rear side.
► Remove the cable clamp(2) on the up-
per side.