80S-20用户手册 - 第173页
SIPLACE 80S -20/F4 User Manual 4 Placement functions Software version SR.407.xx 01/2001 US Edition 4. 3 Feeders 173 4.3.4.1 Meaning of the entr i es i n the t able for the linear fee der – Loc. Number o f the loca tion –…
4 Placement functions SIPLACE 80S-20/F4 User Manual
4.3 Feeders Software version SR.407.xx 01/2001 US Edition
172
4.3.4 "Linear feeder" view
When refilling the linear feeders with components, the operator must select the correct component
in the Setup view to refill an empty track (see Section 4.1.1
). The track with the corresponding lin-
ear feeder must be vibrated so that the new components move to the front after the tray has been
inserted. 4
4
Å Click on the icon.
The "Linear feeder" view is displayed (see Fig. 4.3 - 5
).
4
Fig. 4.3 - 5 "Linear feeder" view
SIPLACE 80S-20/F4 User Manual 4 Placement functions
Software version SR.407.xx 01/2001 US Edition 4.3 Feeders
173
4.3.4.1 Meaning of the entries in the table for the linear feeder
– Loc.
Number of the location
– Track
Number of the track
– Div.
Number of the feeder division
– Tray
This column is not relevant for the linear feeder table.
– CmpName
Name of the component
– Vibrate
If the "<==" symbol is displayed in this column, then this means that the linear feeder on the
corresponding track is currently being vibrated.
4
4.3.4.2 Vibrate track with linear feeder
Å Select the entry in the table for the track with the linear feeder that has been refilled and that
is to be vibrated now.
The selected line is highlighted in light blue in the table. The "Vibrate on" button is active.
Å Click on the Vibrate on button.
The components used to refill the track are vibrated to the front.
The "Vibrate off" button is active.
Å Click on the Vibrate off button when the vibrating is to be switched off.
Vibration stops.
NOTE
If the user interface is switched to a different view, then vibration will also stop. 4
4 Placement functions SIPLACE 80S-20/F4 User Manual
4.3 Feeders Software version SR.407.xx 01/2001 US Edition
174
4.3.5 "Wafflepack Changer" view
This view contains all the functions needed for refilling and making available waffle pack trays. 4
4
Å Click on the icon.
The "Wafflepack Changer" view is displayed (see Fig. 4.3 - 6
).
4
Fig. 4.3 - 6 "Wafflepack Changer" view
4.3.5.1 Go to refill position
To allow the trays in the waffle pack changer to be refilled, they must be moved to the refill position.
This can be done during placement. If, however, the placement head attempts to access compo-
nents from one of these waffle pack trays, placement is interrupted until the refill position has been
quit. This is indicated by an appropriate status message. 4
Å Activate the option button corresponding to the location of the waffle pack changer.
Å Click on the Go to refill position button.
The waffle pack changer moves all waffle pack trays to the refill position.