80S-20用户手册 - 第475页

SIPLACE 80S-20/F4 User Manual 11 Station extensions /Hardware Software version SR.407.xx 01/2001 US Edition 11.3 Dual conveyor 475 1 1.3 Dua l convey or 1 1 .3.1 Structure of the dual conveyor The co nveyor belts are dr …

11 Station extensions /Hardware SIPLACE 80S-20/F4 User Manual

11.2 Component barcode Software version SR.407.xx 01/2001 US Edition

474

11.2.4 Technical data

Connection Station computer

Data entry Via barcode scanner or keyboard

Number of characters Up to 40

Not permissible

Barcode starts with number 1 or 2, and is less than

5 characters long

Number of barcodes Up to 6 per component

Filter for suppressing data Up to 1 per barcode

Preset code types

Code 39 (standard or ASCII)

Code 2 of 5, interleaved and normal

Code 128, UPC/EAN/JAN codes

(others available upon request)

SIPLACE 80S-20/F4 User Manual 11 Station extensions /Hardware

Software version SR.407.xx 01/2001 US Edition 11.3 Dual conveyor

475

11.3 Dual conveyor

11.3.1 Structure of the dual conveyor

The conveyor belts are driven by DC motors. Each center conveyor has a lifting table for clamping

the PCBs. The width of the PCB conveyor can be adjusted, either using the menu or from the line

computer. 11

Fig. 11.3 - 1 Structure of the dual conveyor

11.3.2 General

As the name suggests, the dual conveyor has two tracks. These are independent of one another,

both electrically and mechanically. As standard, the fixed transport side is on the right, although

there is another variant in which the fixed transport side is on the left. 11

(1) Input conveyor (2) Center conveyor

(3) Output conveyor (4) Lifting table

T1 Transport track 1 11 T2 Transport track 2 11

11 Station extensions /Hardware SIPLACE 80S-20/F4 User Manual

11.3 Dual conveyor Software version SR.407.xx 01/2001 US Edition

476

The transport type can be set to either “synchronous dual conveyor” or “asynchronous dual con-

veyor”. To do this, enter the transport type in the machine data (CONFIG.MA). 11

11.3.3 Definition of the transport tracks

The right-hand transport track (viewed in the transport direction) is designated “transport 1”, and

the left-hand track as “transport 2” (see Fig. 11.3 - 1

). 11

11.3.4 Changing the transport type

11.3.5 Asynchronous transport type

11.3.6 Description

In asynchronous mode, one PCB is processed on one transport track, while another PCB on the

second transport track is moved into the placement position. This saves the full transport time,

greatly increasing output, particularly for PCBs with a short cycle time. 11

11.3.7 Function

If the machine is supplied with job data (cluster, set-up), at any given time during placement the

PCBs on the input conveyors are transported onto the center conveyor (if it is free). The placement

sequence starts as soon as a PCB has been transported onto the center conveyor concerned. The

PCBs are processed one after another. 11

PLEASE NOTE 11

The components to be placed, and the width of the PCBs on transport tracks 1 and 2 must be iden-

tical. 11

If the placement sequence is interrupted, the transport interface will be disabled, and the PCBs

currently on the center conveyors will be completed. 11

The transport interface is enabled or disabled for both transport tracks at the same time. 11

Transport type Entry in CONFIG.MA

Single conveyor 0

Synchronous dual conveyor 1

Asynchronous dual conveyor 2