80S-20用户手册 - 第51页

SIPLACE 80S -20/F4 User Manual 1 Introduction Software version SR.407.xx 01/2001 US Edition 1.11 Overview of the modules - controls 51 the touchs creen ca n be used t o enter data. The ultr a-flat IB M-compatib le PC key…

1 Introduction SIPLACE 80S-20/F4 User Manual

1.11 Overview of the modules - controls Software version SR.407.xx 01/2001 US Edition

1.11.2 Description

All the controls can be reached by a 1.60 m tall person. 1

Main switch 1

The main switch is used to switch the power supply to the machine on and off. 1

RISK OF DEATH

Some parts inside the placement machine carry potentially lethal voltages - even when switched

off at the main switch. 1

Key switch 1

In normal mode, the key switch is set to "0". The key should be removed and kept in a safe place.

It must only be turned to position "I" (set-up mode) by authorized personnel, and then only for cer-

tain maintenance and servicing work. 1

Stop button 1

This button is used to stop the placement machine. 1

Start button 1

This button starts the machine after it has been switched on, or after faults have been eliminated. 1

Emergency stop mushroom-head push-button 1

The emergency stop mushroom-head push-button latches into place when it is pressed. The

power supply for the gantry axes, component tables, conveyor belts, and cutting devices is inter-

rupted, and the voltage to the star axes of the placement heads is reduced. The button must be

turned to release it. 1

Component counter 1

The component counter displays the number of components processed. 1

Station computer, monitor and keyboard 1

The station computer, monitor and keyboard are mounted on a rotating console on the placement

machine’s central cross-beam. The station computer is a desktop model with a Pentium proces-

sor. The operating system is WINDOWS NT 4.0. The SIPLACE graphical user interface, which is

based on the Windows standard, is used to operate and monitor the machine. A color touchscreen

monitor with a resolution of 640 x 480 pixels provides the screen display. Both the keyboard and

SIPLACE 80S-20/F4 User Manual 1 Introduction

Software version SR.407.xx 01/2001 US Edition 1.11 Overview of the modules - controls

the touchscreen can be used to enter data. The ultra-flat IBM-compatible PC keyboard incorpo-

rates a trackball for controlling the mouse. 1

Indicator lamp 1

The sequence of colors is white - green – white. This lamp is used to signal operating states and

malfunctions of the placement machine. 1

Component barcode reader 1

There is a compartment for a Datalogic DL 910 component barcode reader between the monitor

and keyboard. The barcode reader enables the components to be set up and topped up quickly

and reliably. 1

1.11.3 Ergonomic arrangement of the controls

Figure 1.11 - 1 on page 49 provides an overview of the position of the controls, which are subdi-

vided into the following groups: 1

Operating panel on the PCB input conveyor side with 1

– Start button

– Stop button

– Emergency stop mushroom-head push-button

– Main switch (on the left-hand side)

Operating panel on the PCB output conveyor side with 1

– Emergency stop mushroom-head push-button

– Start button

– Stop button

– Component counter

– Key switch

Console on the central cross-beam with 1

– Station computer

– Touchscreen monitor

– Keyboard and

– Component barcode reader (option)

1 Introduction SIPLACE 80S-20/F4 User Manual

1.11 Overview of the modules - controls Software version SR.407.xx 01/2001 US Edition

1.11.3.1 Controls on the input and output conveyor sides of the machine

The controls on the input and output conveyor sides of the machine are identical. 1

Emergency stop mushroom-head push-button, Start and Stop buttons 1

There is an emergency stop mushroom-head push-button, a Start button and a Stop button on

both the input and output conveyor sides of the PCB conveyor. This arrangement was adopted for

the emergency stop mushroom-head push-buttons because it enables them to be reached quickly

and easily from any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This particularly important during testing phases, or when starting

single functions, for example. 1

Key switch 1

The key switch is located on the operating panel on the PCB output conveyor. It is only needed

for setting up and servicing work so, for reasons of efficiency, it is positioned near the Start and

Stop buttons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand side of the

PCB input conveyor. It is located here because it is only needed for servicing and maintenance

work and is therefore not subject to frequent use. 1

1.11.3.2 Controls on the machine console

Station computer, monitor and keyboard 1

The station computer, monitor and keyboard are all mounted on the console. They are arranged

so that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

Component barcode reader 1

The two component tables for supplying components are arranged on the right and left of the ma-

chine. For this reason, the component barcode reader is also located in the central console, since

it enables the operators to work comfortably and efficiently during the set-up and refill check. 1