80S-20用户手册 - 第530页
12 Station extensions / software SIPLACE 80S-20 /F4 User Manual 12.1 Remote sup port Software version SR. 407.xx 01/2001 US E dition 530 12.1.3 Requirements T o enab le a conne ction to be set up b etween th e service ce…
SIPLACE 80S-20/F4 User Manual 12 Station extensions / software
Software version SR.407.xx 01/2001 US Edition 12.1 Remote support
529
12 Station extensions / software
12.1 Remote support
12.1.1 General comments
The "Remote Support" (Remote Service) option enables service personnel in Munich, Singapore
and Norcross to access system data on the line computer, station computer, machine controller
or a GEM computer, if there is one, on the customer’s SIPLACE line or SIPLACE station.
This allows the service engineers to localize and correct software and data problems in the cus-
tomer’s systems online. This feature also makes for better problem-oriented planning of any ser-
vice visits to the customer, thereby keeping servicing time to a minimum. 12
12.1.2 Safety information
DANGER
If movements of machine components are initiated at a customer’s machine via the "Remote
Support", a trained line engineer must be present at the machine. In addition, this line engineer
must be able to communicate by telephone with the engineer who is performing the "Remote
Support".
When performing these operations; it is essential to observe the general safety information pre-
sented in Chapter 2 of this User’s Manual. 12
12.1.2.1 Data security
The machine or system can only be accessed when this is specifically desired by the customer
and when he allows this to be done via the requisite communications PC (Router). 12
The service engineer will be working in a lockable room in the service center. Only authorized per-
sons will have access to this room. 12
12 Station extensions / software SIPLACE 80S-20/F4 User Manual
12.1 Remote support Software version SR.407.xx 01/2001 US Edition
530
12.1.3 Requirements
To enable a connection to be set up between the service center and the customer’s system, both
routers (communications computers) must be able to communicate via a suitable ISDN connec-
tion. 12
12
12.1.3.1 Specifications of the ISDN connection
Equipment
– Network Terminator (NT) with S0 interface which must be accessible via an RJ 45 Western
plug
Features
– File transfer
– ISDN call number forwarding
– Charging information during the call
SIPLACE 80S-20/F4 User Manual 12 Station extensions / software
Software version SR.407.xx 01/2001 US Edition 12.1 Remote support
531
12.1.4 Functions
The following components can be accessed remotely from the service centers in Munich, Sin-
gapore and Norcross. When this is done, the corresponding functions are operated and moni-
tored. 12
Line computer (SCO UNIX)
– "Remote" log-in
– Chat
– Sending commands to the customer’s line computer
– Starting and stopping programs at the customer’s line computer
– "Remote" editing
– File transfer
12
Station computer
– "Remote" log-in
– "Remote" operation of programs (user interface, SITEST, diagnostics)
– Sending messages to the customer’s station computer ("chat mode“)
– File transfer
– "Remote" editing
12
Machine controller
– "Remote" log-in
– File transfer