80S-20用户手册 - 第82页
2 Operational Safety SIPLACE 80S-20 /F4 User Manual 2.1 Safety instru ctions Software version S R.407.xx 01/2001 US E dition 82 2.1.7 Safety instructions for the component vision modules (80F 4 ) DANGER 2 NEVER modi fy o…
SIPLACE 80S-20/F4 User Manual 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
81
Item 6 in Fig. 2.1 - 2
on page 73 showing the warning signs on the basic machine - NAFTA region
Feeder label (enlarged)
DANGER 2
Use only feeders, labeled as shown above, when feeding capacitors based on metal-powder (e.g.
tantalum). 2
2
Use only approved feeders, labeled
as shown below, when feeding
capacitors based on metal-powder
(e.g. tantalum).
Fire Hazard
Can cause death, serious injury
or property damage
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
WARNING
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
2 Operational Safety SIPLACE 80S-20/F4 User Manual
2.1 Safety instructions Software version SR.407.xx 01/2001 US Edition
82
2.1.7 Safety instructions for the component vision modules (80F
4
)
DANGER 2
NEVER modify or bypass safety devices on the placement machine or on the fine pitch or flip chip
vision module. 2
The optical radiation from the fine pitch or flip chip vision module conforms to laser class 1, pro-
vided that the module is permanently installed in the placement machine and the protective hoods
are closed (EN 60825-1 and IEC 825). 2
Fig. 2.1 - 5 Identification of laser class 1
Class 1 Laser Product
SIPLACE 80S-20/F4 User Manual 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
83
Fig. 2.1 - 6 Fine-pitch and flip chip vision module, coplanarity laser module (80F
4
)
(1) Fine-pitch vision module
(2) Flip chip vision module
(3) Coplanarity laser module
2