1 Nozzle cleaning

Clean the nozzles SX4 Offline Nozzles Tool: Wear Part: Consumables: Owner: Version 1.0 1/1 Approved: 1 Weekly 3. Open the slide on magazine 4. Pull off cleaning box with nozzle 2. Press cleaning box onto the nozzle magaz…

Clean the nozzles SX4

Offline

Nozzles

Tool:

Wear Part:

Consumables:

Owner:

Version 1.0 1/1

Approved:

1 Weekly

3. Open the slide on magazine

4. Pull off cleaning box with nozzle

2. Press cleaning box onto the

nozzle magazine

1. Select cleaning box depond on

different nozzle type

5. Place cleaning box into ultroso-

nic bath with distilled water

8. Place opened magazine, Close

the slide and take off cleaning box

Dry up magazine by air gun

Caution: don't open the slide!

Add destilled water for next

cycle if necessarry

7. Switch on the bath

Temp. 40°C, Time: 20 mins

20min

6. Make sure about the correct

liquid level, nozzle tip should be

2-3mm lower than water level

2-3 mm