EN 3.pdf - 第149页

Model DECAN Series Company SAMSUNG TECHWIN Module 3.10 FEEDER V ersion 01 Tit le SPLICING SPROCKET CLEANING and REPLACEMENT Page 3-10-5 Note 4. Apply lubricant to the gear of the Splicing sprocket assembly . 5. Spray LOC…

100%1 / 355
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
SPLICING SPROCKET CLEANING and
REPLACEMENT
Page
3-10-4
Note
[SPLICING SPROCKET CLEANING and REPLACEMENT]
1. After removing the fixing bolts for the left cover(10-M2.5*0.45, 2-M25), separate the left cover from the
Feeder.
2. After removing the fixing bolts for the tape support left cover(2-M2.5*0.45), separate the tape support left
cover from the Feeder.
3. After removing the fixing shaft for the Splicing Sprocket, separate the Splicing Sprocket from the Feeder.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
SPLICING SPROCKET CLEANING and
REPLACEMENT
Page
3-10-5
Note
4. Apply lubricant to the gear of the Splicing sprocket assembly.
5. Spray LOCTITE 641 on the shaft.
6. Set it after assembling the Sprocket into the Feeder's main body.
- Home setting, Sensor initialization, Mapping
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
INDEX MOTOR REPLACEMENT
Page
3-10-6
Note
[INDEX MOTOR REPLACEMENT]
1. After removing the fixing bolts for the motor cover(2-M2.5X0.45), separate the motor cover from the feeder.
2. After removing the fixing bolts for the right cover(19-M2.5*0.45), separate the right cover from the Feeder.
3. Disconnect the index motor connector connected to the main board.