EN 3.pdf - 第150页

Model DECAN Series Company SAMSUNG TECHWIN Module 3.10 FEEDER V ersion 01 Tit le INDEX MOTOR REPLACEMENT Page 3-10-6 Note [INDEX MOTOR REPLACEMENT] 1. After removing the fixing bolts for the motor cover(2- M2.5X0.45), se…

100%1 / 355
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
SPLICING SPROCKET CLEANING and
REPLACEMENT
Page
3-10-5
Note
4. Apply lubricant to the gear of the Splicing sprocket assembly.
5. Spray LOCTITE 641 on the shaft.
6. Set it after assembling the Sprocket into the Feeder's main body.
- Home setting, Sensor initialization, Mapping
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
INDEX MOTOR REPLACEMENT
Page
3-10-6
Note
[INDEX MOTOR REPLACEMENT]
1. After removing the fixing bolts for the motor cover(2-M2.5X0.45), separate the motor cover from the feeder.
2. After removing the fixing bolts for the right cover(19-M2.5*0.45), separate the right cover from the Feeder.
3. Disconnect the index motor connector connected to the main board.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
INDEX MOTOR REPLACEMENT
Page
3-10-7
Note
4. After removing the fixing bolts for the index motor(2-M3X0.5) , separate the index motor from the Feeder.
5. After replacing it with a new motor, as shown in the figure, firmly attach it to the Motor Gear.
*If the Motor is too firmly attached to the Motor Gear, operation may fail. So, be careful.
6. Temporarily assemble the index motor.