EN 3.pdf - 第199页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.1 1 HEAD V ersion 01 Tit le LM GUIDE ASSEMBL Y Page 3-1 1-39 Note [LM GUIDE ASSEM BL Y] 1. Fix the MAIN BODY to the ASSEMBL Y BLOCK and firmly a ttach the LM GUIDE and …
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
BALL SPLINE REPLAC EMENT (L2)
Page
3-11-38
Note
7. After assembling the Ball Spline, check the following.
Ball Spline's degree of concentricity is less than 0.045mm.
Ball Spline's degree of flatness : X direction - 0.015mm or less, Y direction – 0.015mm or less
X axis distance discrepancy 30±0.02mm
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
LM GUIDE ASSEMBLY
Page
3-11-39
Note
[LM GUIDE ASSEMBLY]
1. Fix the MAIN BODY to the ASSEMBLY BLOCK and firmly attach the LM GUIDE and fix them with
screws.
LM GUIDE's degree of flatness: 0.02mm or less.
Fixing torque: 4Kgf.cm
2. Z STOP PLATE fixed with SCREWS.
Fixing torque: 4Kgf.cm
3. Z_STOP_PLATE fixed with SCREWS.
Fixing torque: 10Kgf.cm
Loctite243
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
Z, R AXIS BELT TENSION ADJUSTMENT (F2)
Page
3-11-40
Note
[Z, R AXIS BELT TENSION ADJUSTMENT (F2)]
Z axis
Belt Tension Value : 136~175Hz
Belt Tension Measurement Location :Middle of the belt.
Belt Tension Adjustment: Use fixing bolts for the Z Idle.
R axis
Belt Tension Value : 409~467Hz
Belt Tension Measurement Location : Middle of the belt.
Belt Tension Adjustment: Use the fixing bolts for the Z axis Motor.