EN 3.pdf - 第216页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.1 1 HEAD V ersion 01 Tit le MIRROR SWING MOTOR REPLACEMENT Page 3-1 1-56 Note [MIRROR SWING MOT O R REPLACEMENT] 1. T urn off the PC and turn of f the Main Switch in th…
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
FLY MIRROR REPLACEMENT
Page
3-11-55
Note
[FLY MIRROR REPLACEMENT]
1. Turn off the PC and turn off the Main Switch in the front of the equipment.
2. Separate the Mirror Assy by releasing the fixing bolts.
3. Remove the fixing bolts for the Mirror to separate it.
4. Replace it with a new Mirror.
5. Refer to the following when you assemble it.
When you assemble the Mirror Cush ion into the Mirror Clamp, spray Cushion DP glue first.
On the Mirror Plate, place the Folding Mirror and assemble Clamp 1,2.
Peel off the Mirror protection vinyl from the assembly areas only. After assembly, peel off the rest.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
MIRROR SWING MOTOR REPLACEMENT
Page
3-11-56
Note
[MIRROR SWING MOT OR REPLACEMENT]
1. Turn off the PC and turn off the Main Switch in the front of the equipment.
2. Separate the cable connected to the motor.
3. Separate the Motor Bracket by releasing the fixing bolts.
4. Remove the fixing bolts for the motor to separate it.
5. Separate the Pulley by releasing the Fixing Set Screws.
6. Replace with a new motor.
7. Use a gap jig when you assemble the Motor.(fixing torque : 7kgf.cm)
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
SWING CAM SET SCREW REASSEMBLY
Page
3-11-57
Note
[SWING CAM SET SCREW REASSEMBLY]
1. After spraying EP2 to the whole CAM areas, assemble the MIRROR SHAFT ASSY into the MAIN B ODY.
After assembling the BEARING HOUSING ASSY, fix it with screws.
Fixing torque: 10Kgf.cm
Spray Loctite243.
2. After assembling the CAM into the MIRROR SHAFT, temporarily fix it with SCREWS.
3. Fix the ARM JOINT ASSY into the MAIN BODY with SCREWS.
Fixing torque: 10Kgf.cm
Spray Loctite243.