EN 3.pdf - 第217页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.1 1 HEAD V ersion 01 Tit le SWING CAM SET SCREW REASSEMBL Y Page 3-1 1-57 Note [SWING CAM SET SCREW REASSEMBL Y] 1. After spraying EP2 to the whole CAM areas, assemble …
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
MIRROR SWING MOTOR REPLACEMENT
Page
3-11-56
Note
[MIRROR SWING MOT OR REPLACEMENT]
1. Turn off the PC and turn off the Main Switch in the front of the equipment.
2. Separate the cable connected to the motor.
3. Separate the Motor Bracket by releasing the fixing bolts.
4. Remove the fixing bolts for the motor to separate it.
5. Separate the Pulley by releasing the Fixing Set Screws.
6. Replace with a new motor.
7. Use a gap jig when you assemble the Motor.(fixing torque : 7kgf.cm)
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
SWING CAM SET SCREW REASSEMBLY
Page
3-11-57
Note
[SWING CAM SET SCREW REASSEMBLY]
1. After spraying EP2 to the whole CAM areas, assemble the MIRROR SHAFT ASSY into the MAIN B ODY.
After assembling the BEARING HOUSING ASSY, fix it with screws.
Fixing torque: 10Kgf.cm
Spray Loctite243.
2. After assembling the CAM into the MIRROR SHAFT, temporarily fix it with SCREWS.
3. Fix the ARM JOINT ASSY into the MAIN BODY with SCREWS.
Fixing torque: 10Kgf.cm
Spray Loctite243.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
FIDUCIAL CAMERA LIGHTING LED CHANGE
Page
3-11-58
Note
[FIDUCIAL CAMERA LIGHTING LED CHANGE]
1. Turn off the PC and turn off the Main Switch in the front of the equipment.
2. Disconnect the video cable connector from the Fiducial Camera.
3. Disconnect the cable from the Fiducial Camera.
4. Remove the fixing bolts from the Fiducial Camera to separate it.