EN 3.pdf - 第48页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.3 BUT T otal Pages 4 T able of Contents [BUT OPERATION CHECK] ................................................................................ 2 [BUT DETECTION SENSO R …
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.2 BOARD
Version
01
Title
CONVEYOR SUB IF BOARD REPLACEMENT
Page
3-2-34
Note
[CONVEYOR SUB IF BOARD REPLACEMENT]
Conveyor Sub IF Board notifies the CAN Conveyor Board and the Safety Frop Board of the OP panel status and
sends the digital outputs from the air pressure sensor to the CAN Conveyor.
1. Separate the cable connected to the board.
2. Remove the fixing bolts for the board and replace it with a new board.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.3 BUT
Total Pages
4
Table of Contents
[BUT OPERATION CHECK] ................................................................................ 2
[BUT DETECTION SENSOR REPLACEMENT] .................................................. 3
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.3 BUT
Version
01
Title
BUT OPERATION CHECK
Page
3-3-2
Note
[BUT OPERATION CHECK]
1. In the MMI's <Diagnosis> <IO> menu, check operation of the <BUT I/O>.
2. Check for scratches, dents and other damage to the exterior of the Backup Table.
3. See if the Backup Table Up/Down Sol.valve's Speed Control is closed.
* Checkpoint
- No scratches or dents in the Backup Table.
- Backup Table Up/Down Sol.valve's Speed Control is closed.