EN 3.pdf - 第9页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.1 ANC V ersion 01 Tit le ANC AIR PRESS URE LINE WIRING (F2) Page 3-1-7 Note [ANC AIR PRESSURE LINE WIRING (F2)] Front ANC Using the air pressure tube connected to the…
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.1 ANC
Version
01
Title
SHUTTER SENSOR ADJUSTMENT
Page
3-1-6
Note
[SHUTTER SENSOR ADJ USTMENT]
1. Close the shutter and move the close detection sensor and meanwhile check if the sensor light is on.
(Check the detection range of the sensor in the bottom)
2. Move it by 1 mm from right to left of the close detection and then assemble it.
3. Open the shutter and move the open detection sensor and meanwhile check if the sensor light is on.
(Check the detection range of the sensor in the top)
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.1 ANC
Version
01
Title
ANC AIR PRESS URE LINE WIRING (F2)
Page
3-1-7
Note
[ANC AIR PRESSURE LINE WIRING (F2)]
Front ANC
Using the air pressure tube connected to the Conveyor Assy, make a connection to the ANC cylinder.
- Blue : connected to the cylinder shutter.
- Black : connected to the sensor in the rear of the cylinder.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.1 ANC
Version
01
Title
ANC AIR PRESS URE LINE WIRING (F2)
Page
3-1-8
Note
Rear ANC
Using the air pressure tube connected to the Conveyor Assy, make a connection to the ANC cylinder.
- Blue : connected to the cylinder shutter.
- Black : connected to the sensor in the rear of the cylinder.
* Cautions
- Unlike the front, there is no bottom cylinder.
- Separate the ANC tube connected to the Conveyor Assy and make a connection to the ANC cy linder.