LBO 27 Zoll - 第53页
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4 09/2007 Edition 53 2.6 Mechanical inst allation of the stoppers and run- ning of the hoses and cables : Shut down the placement system an d switch it off at th…
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
52
2.5.2 Laser safety instructions
2
Laser radiation! 2
The radiation from the laser diode (infrared or IR
light) of the laser light barrier is harmful to the human
eye. 2
ÆSo never look into the laser beam!
ÆMake sure that the laser beam cannot be reflected
during use.
2
2
2
2
2
2
2
The laser beam output at the barcode template window does not exceed 1.0 mW. The laser light
barrier thus conforms to protection class 2. 2
There must be no manipulation of the barrier. 2
2
2
2
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4
09/2007 Edition
53
2.6 Mechanical installation of the stoppers and run-
ning of the hoses and cables
: Shut down the placement system and switch it off at the main switch.
2
The safety instructions of 2.6 are valid for the whole installation! 2
2
2.6.1 Running of the pneumatic hoses and the connection cable sets
: Remove the lifting tables from both processing areas by unscrewing the hexagon socket
screws marked in the picture below.
2
2
Lifting table
Hexagon socket screws
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
54
: Remove the conversion board cover by unscrewing the four screws marked in the picture be-
low..
2
2
: Unscrew the three screws to remove the cable duct cover..
2
2
4 hexagon socket screws
Conversion board cover
3 hexagon socket screws