LBO 27 Zoll - 第62页
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27" 09/2007 Edition 62 : Now run the conne ction cable from P A1 through the duct to the conversio n board. The Sub-D- connector h as to stay in P A1. 2 2 : Connec…
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4
09/2007 Edition
61
: Run the cable and the hose further along the plastic cable ducts to the conversion board. See
picture below. The cable has to be connected to the conversion board. The hose has to be run
through the middle of the machine into PA1 to the pneumatic block.
2
2
Feed hose through the duct into PA1 to
connect it to the pneumatic block
If the cables are to long,
store them here
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
62
: Now run the connection cable from PA1 through the duct to the conversion board. The Sub-D-
connector has to stay in PA1.
2
2
: Connect the PUN 6 hose coming from PA2 to the right tee connector and the short PUN 6 hose
with quick lock to the left tee connector.
2
Feed cable with black connector to PA2
Duct under the
intermediate con-
veyor. View from
PA1.
Sub-D-connector
coming from PA2
Connect the
hose from PA2
to the right tee
connector
Connect short hose
with quick lock to the
left tee connector
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4
09/2007 Edition
63
: Fix the short hose and the cable coming from PA2 like shown on the picture below with cable
clips and cable ties.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Place cable clips here
and attach cable and
hose like shown