LBO 27 Zoll - 第71页
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4 09/2007 Edition 71 : T ake the stopper for P A2 and put it with the cu tout onto the alloy block. Disconnect the rig ht hose from the pneumatic cylinder before…
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
70
2
Keep the removed screws. You need them if the stopper will be dismounted again to fasten the
alloy block again! 2
2
: Turn the cable on the conveyor width motor like shown on the pictures below. This is to prevent
contact with the stopper.
2
2
Turn cable
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4
09/2007 Edition
71
: Take the stopper for PA2 and put it with the cutout onto the alloy block. Disconnect the right
hose from the pneumatic cylinder before you start.
2
2
Cutout for the alloy block
Disconnect hose for assembly
Holes for the two M6 x 40 mm hexagon socket screws. In the left one there is already one of the
screws inserted because it’s difficult to get it in when the stopper is assembled..
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
72
: Make sure that the cable loop of the stopper comes over the conveyor width motor like shown
on the following picture.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2